IHDAPP 5-pack 120 mm RGB case fans, hydraulic bearing, 1400 RPM, 37.8 CFM, 25 dB, 6-pin, wireless remote
- Case Fan
- 6 pin
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
IHDAPP
Six 120 mm RGB fans with a wireless remote controller deliver 37.8 CFM airflow at up to 1400 RPM while running as quiet as 25 dB
Model 6 Fan Pack w/ Controller
Option 6 Packs
This set includes six 120 mm case fans with addressable RGB lighting and a wireless RF remote controller. Each fan uses a hydraulic bearing and eight silicone damping pads to reduce vibration. The 6-pin connector carries both 12 V and 5 V power for the motor and LEDs. Builders who want a complete, matching airflow kit for a standard ATX chassis will find the pack convenient.
Rated power is 4.2 W per fan at 12 V plus 5 V for the LEDs. Maximum rotational speed reaches 1,400 RPM and delivers 37.8 CFM of airflow with a noise level of 25 dB. The hydraulic bearing self-lubricates to keep friction low during normal operation. Users who need higher static pressure for dense radiator fins should note these fans are tuned for case-volume airflow instead.
The manufacturer quotes a service life of 20,000 hours for the bearing, while the specification sheet lists a 3,000 hour lifespan figure. Under continuous duty the fans maintain their rated speed and airflow without thermal throttling. The wireless controller retains the selected colour mode after power cycles. Buyers who require PWM speed curves tied to CPU temperature will need a motherboard header that supports the 6-pin interface.
| Type | Case Fan |
|---|---|
| Power Connector | 6 pin |
| Color | Black |
| LED | RGB |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
Mount each fan using the four corners, choose intake or exhaust direction, plug the 6-pin PWM cable into the motherboard header, then pair the wireless remote with the controller so the RGB modes actually respond.
The hydraulic bearings are self-lubricating and rated for 20000 hours; the gold-wire LED beads resist exhaustion, so no routine service is required — replace a fan only if noise or airflow degrades after that span.
The 1400 RPM ceiling is reached first; beyond it the fan cannot spin faster, so airflow stays at 37.8 CFM and noise remains near 25 dB.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?