We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five black 120mm RGB case fans with remote controller

IHDAPP

IHDAPP 5 Pack 120mm RGB Case Fans with Remote Controller

SKU CH-5MKP-N9CQD

Five 120 mm RGB case fans with a remote controller, delivering 35-40 CFM at 1200 RPM and 15-20 dBA noise

  • TypeCase Fan
  • RPM1200RPM
  • Air Flow35-40 CFM
  • Noise Level15 - 20 dBA
  • Power Connector4 Pin
  • ColorBlack

Model 5 Fan Pack

Option 5 Fans w/ Controller

  • Quiet operation at 15-20 dBA noise level
  • 1200 RPM speed delivers 35-40 CFM airflow
  • 365 RGB lighting modes controlled via remote
  • Hydraulic bearing ensures long-life silent performance
  • 8 anti-vibration rubber pads minimise operational vibration

Five fans with RGB lighting

This set contains five 120 mm case fans that add addressable RGB illumination to a chassis. Each fan uses a hydraulic bearing rated for long life and runs at a rated speed of 1200 RPM. The bundle includes a remote controller and eight anti-vibration rubber pads for mounting. Builders who want synchronised lighting across multiple intake or exhaust positions will find the pack convenient.

Quiet airflow at standard speed

At the rated 1200 RPM the fans deliver between 35 and 40 CFM of airflow while producing only 15 to 20 dBA of noise. The guide-blade design reduces turbulence and the rubber pads dampen vibration transmitted to the case. Power is supplied through a 4-pin connector and the 500 mm cables reach most motherboard headers or the included controller. The hydraulic bearing keeps acoustic output low during typical desktop use.

Steady output under continuous load

When the system sustains a heavy thermal load the fans maintain their 1200 RPM rating without ramping higher. The hydraulic bearing and rubber isolation keep noise consistent rather than climbing with temperature. The remote lets you lower speed or brightness if acoustics matter more than peak airflow. Users who need variable PWM curves tied to CPU temperature should note the controller only adjusts via remote or case reset button.

Highlights

  • Quiet operation at 15-20 dBA noise level
  • 1200 RPM speed delivers 35-40 CFM airflow
  • 365 RGB lighting modes controlled via remote
  • Hydraulic bearing ensures long-life silent performance
  • 8 anti-vibration rubber pads minimise operational vibration

Specifications

TypeCase Fan
RPM1200RPM
Air Flow35-40 CFM
Noise Level15 - 20 dBA
Power Connector4 Pin
ColorBlack
LEDRGB

Other versions of this model

2 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I install the five 120mm RGB fans and the remote controller?

Mount each 120x120x25mm fan using the included anti-vibration rubber pads, connect the 4-pin power and 6-pin RGB leads to the supplied controller, then use the remote to select from 365 lighting modes and adjust the 1200RPM speed.

What maintenance will these hydraulic-bearing fans need later?

The long-life hydraulic bearings are sealed and require no lubrication; only occasional dust removal from the guide blades is needed to keep airflow at 34.8CFM and noise at 15-20 dBA.

What limit appears first during sustained use at 1200RPM?

The hydraulic bearing’s thermal ceiling is reached first; prolonged maximum-speed operation can raise bearing temperature, gradually reducing the 34.8CFM airflow and increasing noise toward the 20 dBA upper bound.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.