We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three 120 mm matte-finish RGB case fans with a controller hub and remote

IHDAPP

IHDAPP 3-Pack 120mm RGB Case Fans with Controller

SKU CH-NAFT-MJF0R

Three 120 mm RGB fans with hydraulic bearings deliver 37.8 CFM at up to 1400 RPM while staying at 25 dBA, and the included controller supports ten fan ports plus two LED ports

  • TypeCase Fan
  • Power Connector4 Pin
  • ColorMulticolor
  • LEDRGB
  • Three 120 mm fans deliver 37.8 CFM airflow at only 25 dBA noise
  • 16 RGB LEDs per fan create breathing, rainbow and mixed-colour effects via remote
  • Hydraulic bearing runs up to 1400 RPM for long-life, low-noise cooling
  • Eight rubber pads on each frame absorb vibration for a stable case interior
  • Controller hub adds 10 fan ports and 2 LED ports for easy expansion

Three-Pack RGB Cooling Solution

The IHDAPP 3-pack delivers three 120mm case fans with integrated RGB lighting and a dedicated controller hub. Each fan uses a hydraulic bearing and seven bionic shark-fin blades to move air through a chassis. The kit includes mounting screws, a 4-pin power lead and a remote for mode selection. It suits builders who want coordinated lighting and cooling in a single purchase.

Ten-Port Controller Hub

The supplied ARGB controller provides ten fan ports and two LED strip ports for extensive expansion. A small 6-pin interface links each fan to the hub, while a single 4-pin connector draws 5V and 12V power from the PSU. The remote cycles through monochrome breathing, mixed-colour breathing and rainbow effects across 16 LED beads per fan. Builders needing more than ten fan connections must add a second hub.

Sustained Airflow at 1400 RPM

At full speed the fans spin at 1400 RPM and push 37.8 CFM with a rated noise of 25 dBA. The hydraulic bearing maintains consistent torque during long sessions, and eight rubber pads on each frame absorb vibration that can increase over time. Rated power stays at 4.2W per fan, so thermal output remains predictable inside a closed case. Users who require higher static pressure for dense radiators should verify specifications against their cooling target.

Highlights

  • Three 120 mm fans deliver 37.8 CFM airflow at only 25 dBA noise
  • 16 RGB LEDs per fan create breathing, rainbow and mixed-colour effects via remote
  • Hydraulic bearing runs up to 1400 RPM for long-life, low-noise cooling
  • Eight rubber pads on each frame absorb vibration for a stable case interior
  • Controller hub adds 10 fan ports and 2 LED ports for easy expansion

Specifications

TypeCase Fan
Power Connector4 Pin
ColorMulticolor
LEDRGB

Questions about this item

What airflow will the 37.8 CFM fans actually move inside a closed case?

Each 120 mm fan delivers up to 37.8 CFM at 1400 RPM, pushing enough air through typical mesh or vented panels to lower component temperatures without creating a wind tunnel effect.

How does the small 6-pin fan interface limit daisy-chaining compared to standard PWM headers?

The proprietary 6-pin connector carries both 5 V and 12 V power plus RGB signals, so fans must plug into the included controller rather than motherboard headers; the hub supports up to ten fans and two light strips from one 4-pin PSU lead.

Will the 120 × 120 × 25 mm frames and included screws fit standard case mounting points?

Yes — the 120 mm square footprint matches universal case holes, 25 mm thickness clears most side panels, and the twelve supplied screws secure all three fans directly to chassis or radiator mounts.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.