We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White cylindrical PPR pipe fitting 25mm smooth finish

ifan

ifan PN25 25mm PPR Pipe Fitting

SKU CH-792E-PFY5Z

A 25 mm PPR pipe fitting rated PN25 for hot and cold water systems up to 75 °C, joined by heat-fusion welding for a leak-proof, corrosion-resistant connection

  • TypeFitting & Connector Sets
  • Tube Size25mm
  • Item Count1 Carton
  • Thread Size25mm
  • End ConnectionsWelding
  • Standards/CertificationsISO
  • PN25 rating handles high-pressure systems
  • PPR body resists corrosion in hot and cold water
  • Heat-fusion welding creates leak-proof joints
  • Smooth bore maintains steady flow without obstruction
  • Rated for continuous use up to 75°C

25 mm PPR Fitting for PN25 Systems

This 25 mm PPR pipe fitting connects equal-diameter tubes in plumbing installations rated to PN25 pressure. It is intended for installers and maintenance teams working on hot or cold water distribution where ISO-compliant components are required.

Replaces worn or undersized couplings in PN25

The fitting upgrades older joints that leak or cannot sustain the design pressure. The jump is worth it when the existing connection shows corrosion, temperature fatigue or does not meet the PN25 rating for the system.

Socket-fusion weld creates a seamless joint

Installation uses heat fusion on the 25 mm welding ends to form a leak-proof bond without threads or sealants. What usually goes wrong is insufficient heating time or misaligned insertion, which leaves a weak fusion zone that can fail under pressure.

Highlights

  • PN25 rating handles high-pressure systems
  • PPR body resists corrosion in hot and cold water
  • Heat-fusion welding creates leak-proof joints
  • Smooth bore maintains steady flow without obstruction
  • Rated for continuous use up to 75°C

Specifications

TypeFitting & Connector Sets
Tube Size25mm
Item Count1 Carton
Thread Size25mm
End ConnectionsWelding
Standards/CertificationsISO
Maximum PressurePN25
Body MaterialPPR
Temperature Range0-75°C
FeaturesEco-Friendly

Questions about this item

What pipe diameter does the 25mm equal coupling join?

The coupling connects two 25mm PPR pipes using socket or butt fusion welding.

Which fusion method is used and what step is often missed?

Heat the pipe and fitting to the correct temperature, then insert fully without twisting; twisting breaks the seal.

When should the fitting be inspected or replaced?

Inspect joints periodically for stress cracks or leaks, especially after sustained 75°C service or pressure spikes.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.