Lumitec Inc
Lumitec Inc 101296 NevisLT marine electronic
A white LED utility light delivering 1000 lumens across a 180-degree spread, operating on 12/24V with a brushed finish
- Bright 1000-lumen output covers hard-to-light areas
- 180-degree spread delivers even illumination across compartments
- 10-30 V DC range suits 12 V and 24 V systems
- PWM dimmer compatibility allows adjustable brightness
- Ignition-protected certification ensures safe marine installation
What the NevisLT utility light does
The Lumitec NevisLT model 101296 is a white LED utility light built for marine compartments and hard-to-reach areas. It delivers 1000 integrating-sphere-tested lumens across a 180-degree spread with a 5000 CCT and 70+ CRI. The fixture operates on 10-30 V DC systems, drawing 1.3 A at 12 V DC for a rated 16 W. A brushed finish and 5/32 inch mounting hole suit boat builders and owners who need bright, even illumination without dimming control.
Sustained output and electrical behaviour
At a steady 12 V DC the light pulls 1.3 amps and maintains its 1000-lumen output without a timed toggle protocol. The 10-30 V DC range lets it run directly from 12 V or 24 V vessel buses, and the unit is certified ignition protected for engine-room proximity. Third-party PWM dimmer compatibility is supported, though the NevisLT itself is non-dimming, so output stays constant as long as voltage remains within the specified window.
Thermals, noise and power in normal use
The completely sealed housing dissipates 16 W without moving parts, so operation is silent. No fan or pump noise is present, and the brushed exterior stays warm to the touch under continuous load rather than hot. Current draw remains a flat 1.3 A at 12 V DC, making power planning straightforward for DC distribution panels.
Highlights
- Bright 1000-lumen output covers hard-to-light areas
- 180-degree spread delivers even illumination across compartments
- 10-30 V DC range suits 12 V and 24 V systems
- PWM dimmer compatibility allows adjustable brightness
- Ignition-protected certification ensures safe marine installation
Specifications
No published specifications for this item yet.
Questions about this item
Does the NevisLT 101296 run hot or draw much power when left on all day?
It draws 1.3A at 12V DC for a rated 16 watts, so heat output stays low during continuous use.
What voltage supply must the boat already have for this light to work?
The fixture operates on any 10-30V DC system, covering both 12V and 24V marine electrical installations.
Will the 5/32-inch mounting hole match the cut-outs I already have from older fixtures?
The NevisLT requires a 5/32-inch mounting hole; check your existing cut-outs against that diameter before installing.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor 70204 Acrylic Coated Polyester Gray Hot Shot BoatGuard Boat Cover
- Transparent
BoatBuckle F12071 Kwik-Lok Gunwale Tie-Down Stainless Steel
- Transparent



