We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White cylindrical PPR plumbing fitting 25mm PN25

ifan

ifan PN25 25mm PPR Fitting

SKU CH-J5JX-G0WJ2

25 mm PPR plumbing fitting rated PN25 for hot and cold water up to 75 °C

  • TypeFitting & Connector Sets
  • Tube Size25mm
  • Item Count1 Carton
  • Thread Size25mm
  • End ConnectionsWelding
  • Standards/CertificationsISO
  • PN25 rating handles high-pressure systems
  • PPR body resists corrosion in hot and cold water
  • Heat-fusion welding creates leak-proof joints
  • Smooth interior maintains unrestricted flow
  • Rated for continuous use up to 75°C

25 mm PN25 PPR Fitting

This 25 mm PPR fitting is rated PN25 for pressure and operates from 0 to 75 °C. It uses a welding end connection to create a seamless joint in hot and cold water plumbing systems. The ISO-certified body is corrosion resistant and designed for long service life. Installers who need a single equal coupling for 25 mm tube will find the specification a direct match.

Thermals, Noise and Power Draw

The fitting has no moving parts, so it produces no noise and draws no power during normal use. Its PPR body withstands continuous water temperatures up to 75 °C without degrading, and the smooth interior surface maintains unobstructed flow. Thermal expansion is handled by the material itself, eliminating the need for external cooling or vibration control.

Eco-Friendly Welded Joint

Heat-fusion welding creates a leak-proof connection that requires no sealants, tapes or solvents, reducing chemical use on site. The corrosion-resistant PPR material resists scale build-up, keeping water quality stable over the system life. Because the joint is fused rather than threaded, there are no loose components to tighten or replace during maintenance.

Highlights

  • PN25 rating handles high-pressure systems
  • PPR body resists corrosion in hot and cold water
  • Heat-fusion welding creates leak-proof joints
  • Smooth interior maintains unrestricted flow
  • Rated for continuous use up to 75°C

Specifications

TypeFitting & Connector Sets
Tube Size25mm
Item Count1 Carton
Thread Size25mm
End ConnectionsWelding
Standards/CertificationsISO
Maximum PressurePN25
Body MaterialPPR
Temperature Range0-75°C
FeaturesEco-Friendly

Questions about this item

How is the 25mm PPR fitting installed and what step is often done incorrectly?

The fitting uses heat-fusion welding on the 25mm ends; the step installers often get wrong is not heating both pipe and socket evenly or inserting before the melt is uniform, which can leave a weak joint.

What maintenance or replacement will the PN25 PPR fitting need later?

PPR resists corrosion and scale, so no routine internal maintenance is required; only inspect externally for mechanical damage or UV exposure if installed outdoors, and replace any section that shows cracking or deformation.

What is the first limit reached under sustained use of this PN25 fitting?

The 75 °C temperature ceiling is the first hard limit; running water hotter than that will accelerate creep and can cause the fitting to lose pressure integrity before the PN25 pressure rating becomes an issue.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.