We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White PPR double elbow pipe fitting 25mm

ifan

ifan Double Elbow PPR Pipe Fitting 25mm

SKU CH-26T8-XFY59

Connects 25 mm PPR pipes at two right angles using heat-fusion welding for hot and cold water up to 75 °C

  • TypeFitting & Connector Sets
  • Tube Size25mm
  • Item Count1 Carton
  • Thread Size25mm
  • End ConnectionsWelding
  • Standards/CertificationsISO
  • Corrosion-resistant PPR body handles hot and cold water
  • Withstands continuous temperatures up to 75 °C
  • Heat-fusion welding creates leak-proof 25 mm joints
  • Smooth interior keeps flow unobstructed over time
  • ISO-certified PN25 rating for high-pressure plumbing

25 mm Double Elbow PPR Fitting

This 25 mm double elbow fitting connects PPR water tubes at two right-angle turns in a single component. It is made from PPR polymer rated to PN25 pressure and a 0–75 °C temperature range for hot and cold water systems. The ISO-listed fitting uses heat-fusion welding for leak-proof joints. Plumbers and DIY installers use it to route supply lines around obstacles with fewer separate parts.

Check tube size and welding tools

Verify that the existing pipework is 25 mm outer diameter so the socket-fusion ends match without reducers. Confirm access to a compatible heat-fusion tool and that the installation area allows the double elbow’s full width for the two bends. Ensure the system design stays within the PN25 pressure limit and 75 °C maximum temperature. The fitting is not intended for threaded connections or solvent-cement joining methods.

Sustained pressure and temperature behaviour

Under continuous PN25 pressure the PPR body maintains dimensional stability without creep or stress cracking. The smooth bore resists scale build-up so flow capacity remains constant over long service periods. At the upper end of the 75 °C range the material retains strength and corrosion resistance for extended hot-water circulation. Heat-fused joints stay sealed through thermal cycling without gasket degradation.

Highlights

  • Corrosion-resistant PPR body handles hot and cold water
  • Withstands continuous temperatures up to 75 °C
  • Heat-fusion welding creates leak-proof 25 mm joints
  • Smooth interior keeps flow unobstructed over time
  • ISO-certified PN25 rating for high-pressure plumbing

Specifications

TypeFitting & Connector Sets
Tube Size25mm
Item Count1 Carton
Thread Size25mm
End ConnectionsWelding
Standards/CertificationsISO
Maximum PressurePN25
Body MaterialPPR
Temperature Range0-75°C
FeaturesEco-Friendly

Questions about this item

What comes in the box and do I need any extra parts to install the 25 mm double elbow?

The carton contains one double elbow fitting. Installation requires a PPR heat-fusion tool and compatible 25 mm PPR pipe; no separate threads, gaskets or adhesives are supplied.

Should I choose a different pressure rating or temperature range for my hot-water system?

This fitting is rated PN25 and handles 0-75 °C, covering standard domestic hot and cold water lines; no alternative ratings are offered for this model.

How does the PN25 rating perform when the fitting is welded into a live 25 mm pipe run?

Once heat-fused, the joint becomes a seamless, leak-proof section that maintains the full PN25 pressure capacity and smooth bore flow of the pipe.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.