We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black figure-8 C7 to NEMA 1-15P power extension cord, 6 ft

ienza 6 ft Figure 8 C7 Power Extension Cord 18 AWG 125V 10A

SKU CH-J75R-NX1F9

A six-foot figure-8 C7 extension cord rated 125 volts and 10 amps for USB-C charging hubs

  • FeaturesThis power extension cord is made by ienza and features a st
  • Extends reach for GaN chargers with 6 ft length
  • Non-polarised C7 plug fits IEC 60320 C8 inlets
  • 18 AWG wire rated for 10 A at 125 V
  • UL listed for verified electrical safety
  • Black finish blends with desk or travel kit

What it is

The ienza 6 ft Figure 8 C7 power extension cord is a non-polarised two-pin cable rated at 125 V and 10 A using 18 AWG conductors. It carries UL listing and terminates in an IEC 60320 C7 connector to a NEMA 1-15P plug. The black cable suits any device that accepts a Figure 8 C7 or C8 inlet.

How it fits a build

The cord extends the reach between a wall outlet and compatible USB-C GaN charging stations such as the Breeket or Bovica 100 W six-port hub, the Gazeki 100 W six-port brick, or the LanLuk 200 W block. It also works with other hubs requiring a Figure 8 C7 connection, freeing the charger from sitting directly against the socket.

Behaviour under sustained load

The 18 AWG conductors and 10 A rating support continuous operation at the full 125 V specification without overheating. UL listing confirms the cable meets safety requirements for prolonged use. It is not suited for equipment drawing more than 10 A or for polarised inlet requirements.

Highlights

  • Extends reach for GaN chargers with 6 ft length
  • Non-polarised C7 plug fits IEC 60320 C8 inlets
  • 18 AWG wire rated for 10 A at 125 V
  • UL listed for verified electrical safety
  • Black finish blends with desk or travel kit

Specifications

Brandienza
FeaturesThis power extension cord is made by ienza and features a style with material. It supports a voltage of 125 volts and an input current of 10 amps. The cable is Black in color and is UL listed. It comes with a Male-to-Female connector and does not require batteries.

Questions about this item

What is the maximum current the 18 AWG wire can carry continuously?

The cord is rated for 10 A at 125 V, so the 18 AWG conductors are sized to carry that load continuously.

Does the cable or its connectors get noticeably warm when powering a 100 W GaN charger all day?

At a 100 W draw the current is well below the 10 A rating, so temperature rise stays minimal during extended use.

Which charger inlet must my device have for this cord to fit?

Your charger needs an IEC 60320 C8 inlet; the cord provides a matching C7 plug.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.