We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver metal and plastic drive tray for 2.5 inch SATA SAS drives

ICY DOCK

ICY DOCK MB991TRAY-B 2.5" SATA SAS Drive Tray ssd accessory

SKU CH-5RJ6-8RW86 MPN MB991TRAY-B

Holds a 2.5" SATA or SAS drive in a 3.5" bay for MB991 and MB994 series backplanes

  • ColorSilver
  • Conversion TrayTray for ToughArmor (MB991, MB994) Series
  • Mobile Rack Drives Support1 x 2.5" Drive to 3.5" Bay
  • Mobile Rack Interface2.5" SAS & SATA I / II / III hard drive and SSD
  • Protection CaseSingle Drive
  • SpecificationsHDD Interface: 2.5" SAS & SATA I / II / III hard drive and S
  • Fits 2.5" SATA and SAS drives up to 15 mm height
  • Works with MB991 and MB994 series mobile racks
  • Hot-swap tray enables quick drive changes without tools
  • Supports 6 Gb/s transfer bandwidth for fast data access
  • Plastic and aluminium alloy construction protects the drive

Replacement tray for ToughArmor MB991 and MB994

This aluminium-and-plastic tray converts a single 2.5" SATA or SAS drive to fit a standard 3.5" bay in compatible ICY DOCK mobile racks. It accepts drive heights of 7mm, 9.5mm, 12.5mm and 15mm. The tray is designed for the MB991IK and MB994SP series backplanes. It provides a direct mechanical interface without additional cabling.

Passive cooling with no added power draw

The open alloy frame lets system airflow cool the installed drive naturally. No fan or active components are present, so the tray adds zero noise and zero electrical load. Data bandwidth reaches up to 6Gb/Sec through the native SATA or SAS connection. Thermal performance depends entirely on the host chassis airflow.

Replaces a lost or damaged caddy in existing MB991

Use this tray when the original carrier is missing, bent or cracked and the backplane itself remains functional. It is not a standalone enclosure and cannot be used without a compatible ICY DOCK mobile rack. Builders needing a hot-swap tray for a different backplane series should verify compatibility before purchase.

Highlights

  • Fits 2.5" SATA and SAS drives up to 15 mm height
  • Works with MB991 and MB994 series mobile racks
  • Hot-swap tray enables quick drive changes without tools
  • Supports 6 Gb/s transfer bandwidth for fast data access
  • Plastic and aluminium alloy construction protects the drive

Specifications

BrandICY DOCK
ModelMB991TRAY-B
ColorSilver
Conversion TrayTray for ToughArmor (MB991, MB994) Series
Mobile Rack Drives Support1 x 2.5" Drive to 3.5" Bay
Mobile Rack Interface2.5" SAS & SATA I / II / III hard drive and SSD
Protection CaseSingle Drive
SpecificationsHDD Interface: 2.5" SAS & SATA I / II / III hard drive and SSD
Drive Height: 7mm, 9.5mm, 12.5mm, 15mm
Data Transfer Rate: Transfer bandwidth up to 6Gb/Sec
Structure: Plastic and Aluminum alloy
Compatible ICY DOCK Model:
Single Bay Model: MB991IK-B
Multi Bay Model: MB994SP-4S
FeaturesCompatible hard drive caddy (tray) for ICY DOCK MB994SP-4S 4 in 1 SAS / SATA hot swap backplane RAID cage
Shipping weight0.12 kg
Package size140 × 91 × 23 mm

Questions about this item

How do I install a 2.5" SATA or SAS drive into the MB991TRAY-B and slide it into my MB991IK or MB994SP cage?

Place the 2.5" drive into the tray, align the SATA or SAS connector with the tray's interface, secure it using the included screws for the 7mm, 9.5mm, 12.5mm or 15mm height, then insert the assembly into the hot-swap bay until it locks.

Will the tray's connector or locking mechanism need replacement after repeated hot-swap cycles?

The tray uses a passive SATA and SAS interface rated for 6Gb/Sec with no active electronics; the metal latch and plastic guide rails are designed for repeated insertion, so no scheduled replacement is required.

What is the maximum sustained throughput I can expect from a drive mounted in this tray?

The tray's SATA and SAS interface supports up to 6Gb/Sec bandwidth, so the sustained limit will be the drive's own sequential read or write speed, whichever is lower.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.