We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five blue Cat6 patch cables, ten feet each, RJ45 connectors, clear snagless boots

ICC ICPC5K10BL network ethernet cable Cat6 10 ft 5-pack 24 AWG blue

SKU CH-45EX-XV1NY MPN ICPC5K10BL

Five 10-foot Cat6 patch cables with 24 AWG stranded copper, 550 MHz bandwidth, 45 micro-inch gold contacts, and PoE++ support up to 100 W

  • TypeEthernet
  • Cat6
  • Connector ARJ45
  • ColorBlue
  • Features, , , ,
  • NEC-compliant copper conductors reduce fire risk per Section 800.179
  • PoE++ support up to 100 W powers cameras and access points
  • Factory tested beyond TIA standards for 1000 Mbps at 550 MHz
  • 45 micro-inch gold contacts resist corrosion through 750 insertion cycles
  • Snagless boots protect latch during dense patch-panel work

What this pack provides

This five-pack supplies ten-foot Cat6 patch cords with RJ45 connectors on each end. They are built from 100% stranded bare copper conductors that meet NEC Section 800.179 and carry UL and ETL listings. The cables are rated for 75 °C and 300 V, support PoE++ at up to 100 W, and are intended for indoor channel patching between patch panels, switches and network equipment.

What to verify before ordering

Confirm that your patch panels, switches and wall outlets use standard RJ45 ports wired to the T568B pinout. The cords are designed for indoor use only and should not be installed in outdoor or plenum spaces unless your local code permits the PVC jacket. Each connector features 45 micro-inch gold-plated contacts rated for over 750 insertion cycles, so ensure the mating ports are clean and undamaged for reliable mating.

Behaviour under sustained load

Factory testing confirms performance that exceeds TIA standards at frequencies up to 550 MHz, supporting sustained gigabit data rates of 10, 100 and 1000 Mbps. The stranded copper construction and 300 V rating maintain stable signal integrity and power delivery during continuous PoE++ operation at 100 W. The molded boot design provides strain relief that preserves contact force and reduces intermittent faults during long-term rack or work-area deployments.

Highlights

  • NEC-compliant copper conductors reduce fire risk per Section 800.179
  • PoE++ support up to 100 W powers cameras and access points
  • Factory tested beyond TIA standards for 1000 Mbps at 550 MHz
  • 45 micro-inch gold contacts resist corrosion through 750 insertion cycles
  • Snagless boots protect latch during dense patch-panel work

Specifications

BrandICC
TypeEthernet
Cat6
Connector ARJ45
ColorBlue
Features, , , ,

Questions about this item

What comes in the box and do I need to buy connectors separately?

The box contains five Cat6 patch cords, each ten feet long with RJ45 plugs already moulded on both ends, so no extra connectors are required.

Which version should I choose for a 100 W PoE++ camera run?

These cables are rated for PoE++ up to 100 W and use 100 % stranded bare copper conductors, making them suitable for that camera run.

What does the 550 MHz bandwidth mean when the cable is plugged into a gigabit switch?

The 550 MHz rating exceeds the TIA Category 6 requirement and supports reliable 10/100/1000 Mbps gigabit Ethernet performance on the link.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.