We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
HUHUTa BYHA-002 wireless charging stand in plastic and silicone finish with included adapter

HUHUTa BYHA-002 15W wireless charger stand with QC3.0 adapter

SKU CH-S3TJ-EV20Y

A 15 W Qi stand with included QC3.0 adapter charges compatible phones at up to 15 W

  • Compatible Phone ManufacturerCellular Phones
  • AdapterUSB Type C, USB Type A
  • Standard USB Port0
  • Output Volt9 volts
  • Output Amp3 amps
  • Support Volt110 volts
  • Charges compatible phones up to 15W with included QC3.0 adapter
  • Stand design keeps screen visible while charging on a desk
  • Four output levels match 5W, 7.5W, 10W and 15W device needs
  • 9 ft Type-C cable gives flexible placement near a power outlet
  • Compact 11.2 × 10.2 × 7.1 cm footprint saves desktop space

HUHUTa BYHA-002 15W wireless charger stand

The HUHUTa BYHA-002 is a 15W wireless charging stand designed for smartphones that support Qi wireless charging. It includes an 18W QC3.0 power adapter and a 3.9FT Type-C cable so the station works immediately. The plastic and silicone construction holds the phone at a convenient viewing angle while charging. It suits users who want a single desktop dock for multiple phone brands.

Thermals noise and power draw

The stand delivers up to 15W output using 9V at 3A from the supplied adapter, with selectable 5W, 7.5W and 10W modes for broader compatibility. Input accepts 5V at 2A, 9V at 2A or 12V at 1.5A, drawing power from the included QC3.0 brick. No active cooling is present so operation is silent; the low-profile design dissipates heat passively across the plastic and silicone housing.

Maximum 15W fast charge for Google and Motorola

The charger reaches its 15W peak only with Google Pixel and Motorola devices listed in the compatibility data. Samsung Galaxy models from S26 to S24 are limited to 10W, while iPhone 17 to 12 series charge at 7.5W. Older Samsung and Pixel handsets fall back to 5W. Buyers whose primary phone is an iPhone or a Samsung flagship will not see the advertised 15W speed.

Highlights

  • Charges compatible phones up to 15W with included QC3.0 adapter
  • Stand design keeps screen visible while charging on a desk
  • Four output levels match 5W, 7.5W, 10W and 15W device needs
  • 9 ft Type-C cable gives flexible placement near a power outlet
  • Compact 11.2 × 10.2 × 7.1 cm footprint saves desktop space

Specifications

BrandHUHUTa
ModelBYHA-002
Compatible Phone ManufacturerCellular Phones
AdapterUSB Type C, USB Type A
Standard USB Port0
Output Volt9 volts
Output Amp3 amps
Support Volt110 volts

Questions about this item

How do I set up the BYHA-002 stand with the included QC3.0 adapter and Type-C cable?

Plug the USB-C end of the 3.9FT cable into the stand base, connect the USB-A end to the 18W QC3.0 adapter, then plug the adapter into a 110V outlet. The step people miss is using the supplied adapter; a weaker brick drops output to 5W or 7.5W.

What part will need replacement first with daily use?

The 3.9FT USB-C cable sees the most flexing at the stand connector and will likely fray before the plastic-silicone stand or the 18W QC3.0 adapter fails.

At what point does sustained charging hit a thermal limit?

The stand delivers 15W, 10W, 7.5W or 5W depending on the phone; if the coil overheats it throttles to the next lower mode, so the first limit you hit is thermal throttling rather than a fixed timer.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.