We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray rectangular wall-mounted motion sensor with nightlight

Hubbell Incorporated

Hubbell Incorporated WS2000NGY Wall Mount Sensor, Occupancy, Vacancy

SKU CH-8AE7-5W6RS

Wall-mount motion sensor provides occupancy and vacancy detection with a built-in nightlight for fluorescent and LED loads up to 120–277 V AC

  • Covers up to 1,200 sq ft with passive infrared sensing
  • Works from 120 to 277V AC without a neutral wire
  • Handles 1,000 W incandescent load at 120V
  • Occupancy and vacancy modes plus built-in nightlight
  • Hard-wired communication for reliable operation

Wall Mount Occupancy Sensor

The Hubbell WS2000NGY is a hard-wired passive infrared sensor that switches lighting on when motion is detected and off when the space is vacant. It mounts directly on a wall and covers up to 1,200 sq ft for offices, corridors or utility rooms. The unit operates on 120 to 277V AC and includes an integrated nightlight.

Sustained Load Behaviour

The sensor controls fluorescent and LED loads rated at 1,000W at 120V AC without dimming. Because it uses a simple on-off relay, the contact rating remains constant during continuous occupancy cycles. No neutral wire is required, simplifying retrofit installations.

Hard Wired Interface Limits

Communication is hard wired only, so the device cannot be addressed or configured over a network. Coverage is limited to the 1,200 sq ft passive infrared pattern and the single-button manual override. The grey housing is rated for indoor use at the stated voltage range.

Highlights

  • Covers up to 1,200 sq ft with passive infrared sensing
  • Works from 120 to 277V AC without a neutral wire
  • Handles 1,000 W incandescent load at 120V
  • Occupancy and vacancy modes plus built-in nightlight
  • Hard-wired communication for reliable operation

Specifications

BrandHUBBELL WIRING DEVICE-KELLEMS

Questions about this item

Does the WS2000NGY sensor draw much power or create heat when it runs all day?

The unit operates on a hard-wired 120 to 277V AC supply and uses passive infrared technology with no moving parts, so its own power draw and heat output are minimal during continuous operation

What wiring must already be in the wall box for this sensor to work?

A 120 to 277V AC circuit with line and load conductors is required; no neutral wire is needed for installation

Will the WS2000NGY control the fluorescent and LED fixtures I already have?

Yes, it is compatible with fluorescent and LED lighting up to 1,000W at 120V AC and covers up to 1,200 sq ft with passive infrared sensing

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.