We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Hubbell Incorporated

Hubbell Incorporated Straight Blade Plug 20A 125V Gray

SKU CH-HZ7H-1AFYM

A 20 A 125 V straight-blade duplex receptacle for commercial flush-mount wiring in gray nylon

  • ColorGray
  • MaterialHAWA
  • 20 A rating supports high-draw equipment
  • 125 V AC compatible with standard commercial circuits
  • Gray nylon housing resists impact and chemicals
  • Side-wire terminals simplify flush-mount installation
  • Straight-blade 5-20R duplex fits standard outlets

Hubbell 20 A 125 V Straight Blade Plug

The Hubbell straight blade plug is a commercial-grade receptacle rated for 20 A at 125 V AC. It features a standard duplex outlet with two poles and three wires for flush mounting. The gray nylon body uses side-wiring terminals for secure conductor connection. This component suits fixed wiring in commercial environments.

Suits 20 A commercial branch circuits

Electricians wiring 20 A branch circuits in offices, retail or light-industrial spaces will find the correct rating and mounting style. Installations that require tamper-resistant shutters, weather-resistant construction, surge suppression or a power indicator should select a different device. The plug is not corrosion resistant and lacks HP-rated motor switching beyond 1 hp.

20 A 125 V rating decides fit

The single specification that determines compatibility is the 20 A 125 V rating combined with the 5-20R configuration. Match this exactly to the circuit breaker and conductor size specified in the electrical design. Using the device on a circuit with a different voltage or amperage rating creates a safety hazard and violates electrical codes.

Highlights

  • 20 A rating supports high-draw equipment
  • 125 V AC compatible with standard commercial circuits
  • Gray nylon housing resists impact and chemicals
  • Side-wire terminals simplify flush-mount installation
  • Straight-blade 5-20R duplex fits standard outlets

Specifications

BrandHubbell Wiring Device-Kellems
ColorGray
MaterialHAWA

Questions about this item

Will the 20 A 125 V rating match the circuit breaker in my older workshop panel?

The device is rated for 20 A at 125 V AC, so it aligns with a standard 20 A single-pole breaker and 12 AWG wiring commonly found in older workshops.

How can I verify the duplex receptacle is wired correctly after installation?

Use a receptacle tester or multimeter to confirm 125 V between hot and neutral on each outlet, proper ground continuity, and correct polarity across both 5-20R slots.

Does the package include mounting screws and wire connectors, or must I supply them?

The receptacle itself is supplied; mounting screws and wire connectors are not included and must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.