We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brown Eaton 20 A self-test GFCI blank-face plug, thermoplastic body, brass terminals

Eaton

Eaton 20 Amp Self Test Blank Face GFCI straight blade plug Brown 125V #14-#10

SKU CH-7PHM-0EJNQ

Self-test GFCI blank-face plug, two-pole three-wire grounding, #14–#10 AWG, 20 A 125 V, brown thermoplastic

  • Self-test GFCI monitors ground faults automatically
  • 20 A rating supports heavy-duty residential and commercial loads
  • Accepts #14 to #10 AWG conductors for flexible wiring
  • Back and side wiring terminals speed up installation
  • Brown thermoplastic housing resists impact and UV exposure

20 Amp GFCI Blank Face Plug

This Eaton straight blade plug provides ground-fault protection with an integrated self-test function. It accepts #14 to #10 AWG conductors and is rated for 20 amps at 125 volts. The blank face design suits flush-mount installations in residential and commercial wiring projects.

Back and Side Wire Installation

The device supports both back-wire and side-wire termination using brass terminals. Installers must strip conductors to the correct length for the chosen method and torque screws to specification. Miswired line and load connections will prevent the self-test from passing and leave the circuit unprotected.

Continuous 20 Amp Operation

Under sustained load the thermoplastic housing and brass contacts maintain stable temperature rise within the 20 amp rating. The self-test cycle runs automatically at regular intervals to verify trip functionality without interrupting power. A persistent fault condition will cause the device to trip and remain latched until manually reset.

Highlights

  • Self-test GFCI monitors ground faults automatically
  • 20 A rating supports heavy-duty residential and commercial loads
  • Accepts #14 to #10 AWG conductors for flexible wiring
  • Back and side wiring terminals speed up installation
  • Brown thermoplastic housing resists impact and UV exposure

Specifications

BrandEaton

Questions about this item

How can I verify the self-test GFCI is working correctly after installation?

Press the test button on the device; the reset button should pop out and power to the load terminals will be cut. Press the reset button to restore power. If the reset button does not pop out or cannot be pressed back in, the self-test has detected a fault and the unit must be replaced.

What is included in the box and what additional items are required for installation?

The package contains the Eaton 20 A self-test blank-face GFCI receptacle only. You must supply #14–#10 AWG copper conductors, a compatible electrical box, cover plate, and wire connectors or terminals for back and side wiring.

Which version should I choose for a 20 A, 125 V circuit using #12 AWG wire?

This single model is rated 20 A at 125 V and accepts #14–#10 AWG conductors, so it covers #12 AWG installations. No other capacity or voltage versions are offered for this part number.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.