We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow 30A 125V marine shore power cordset 25ft

Hubbell Incorporated

Hubbell Incorporated HBL61CM03PMolded marine electronic 30A 125V 25ft

SKU CH-FP2P-W3PE0 MPN HBL61CM03PMolded

A 25-foot yellow marine cordset rated 30 A at 125 V with a moulded flex-neck and copper crimp terminations for ship-to-shore power

  • 30 A 125 V rating delivers 3750 W shore power
  • 25 ft yellow PVC jacket reaches distant pedestals
  • Moulded flex-neck design reduces cable fatigue
  • Copper crimp barrel terminations ensure secure connections
  • Strain-relief bull ring protects against pulling stress

Marine 30 A 125 V shore-power cordset

This 25-foot cordset supplies 30 A at 125 V AC for single-phase shore-power connections. The moulded flex-neck and strain-relief bull ring reduce cable fatigue at the boat inlet. Copper conductors with copper crimp-barrel terminations maintain a secure electrical path. It is built for marine-grade, twist-lock L5-30 service.

Yellow PVC jacket and copper conductors

The yellow PVC jacket resists UV, oil and abrasion in salt-water environments. Copper conductors carry the rated 3 750 W load without excess voltage drop over the 25-foot run. The twist-lock blades lock positively to prevent accidental disconnection underway. Normal operation stays within the 30 A thermal rating without additional cooling.

Moulded flex-neck and bull-ring strain relief

The moulded flex-neck absorbs repeated bending at the connector, extending cable life in rolling seas. A built-in bull ring transfers pulling force away from the terminations during deployment and retrieval. No separate tools or adapters are required for standard L5-30 inlets. The assembly arrives ready for immediate ship-to-shore use.

Highlights

  • 30 A 125 V rating delivers 3750 W shore power
  • 25 ft yellow PVC jacket reaches distant pedestals
  • Moulded flex-neck design reduces cable fatigue
  • Copper crimp barrel terminations ensure secure connections
  • Strain-relief bull ring protects against pulling stress

Specifications

BrandBeckson Marine, Inc.

Questions about this item

How do I connect the Hubbell HBL61CM03P 30 A 125 V cordset to my boat's inlet and the shore power pedestal?

Align the L5-30 locking blades with the inlet, push fully in, then twist clockwise until the locking ring clicks; repeat at the shore-power pedestal, making sure the flexneck seats without forcing the cable into a sharp bend.

What maintenance will the 25 ft yellow PVC-jacketed cordset need over time?

Inspect the jacket for cuts or UV cracking each season, rinse salt spray from the copper crimp barrels and locking ring with fresh water, and replace the cordset if the bull-ring strain relief shows deformation or the blades become pitted.

What is the continuous load limit before the 30 A rating is reached on this 125 V cordset?

The cordset is rated for 30 A at 125 V, giving a maximum continuous capacity of 3 750 W; sustained loads above that level will cause the supply breaker to trip.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.