We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue watertight pin-and-sleeve receptacle with flanged housing and spring-loaded gasketed cap

Hubbell Incorporated

Hubbell Incorporated HBL3100R6W Watertight Pin & Sleeve Receptacle

SKU CH-SS4N-6BFD2

A watertight IEC pin-and-sleeve receptacle rated 100 A at 250 V AC, IP67 and NEMA 4X, with Zytel 101 nylon housing, spring-loaded gasketed cover, and screw terminals for 3 AWG to 1/0 AWG conductors

  • Color/FinishBlue
  • Color MappingBlue
  • TypeLight Switch
  • Watertight reliability with IP67 and NEMA 4X rating
  • Industrial power handling at 100A and 250V AC
  • Rugged Zytel 101 nylon housing resists impact and chemicals
  • Wide operating range from -40°C to +75°C
  • Secure IEC grounded connection with shrouded contacts

Industrial 100A Watertight Receptacle

The Hubbell HBL3100R6W is a watertight pin and sleeve receptacle rated for 100A at 250V AC. It is built for industrial environments that demand secure three-phase connections with two poles and three wires. The IEC grounded configuration and shrouded contacts suit facilities where moisture, dust and impact resistance are daily requirements.

IP67 Enclosure with Zytel 101 Housing

A NEMA Type 4X and IP67 rated enclosure uses Zytel 101 nylon for the housing, body and flange, while the retainer is high-impact thermoset material. The self-closing gasketed cover with a neoprene gasket maintains the seal when the receptacle is not mated. Screw terminals accept conductors from 3 AWG up to 1/0 AWG, and the assembly operates continuously from -40°C to +75°C.

Replaces Non-Watertight Industrial Outlets

This unit upgrades older industrial receptacles that lack a watertight seal or IEC pin-and-sleeve compatibility. The jump is worth it when existing outlets cannot meet IP67 ingress protection or when the spring-loaded cap and gasketed cover are needed to maintain circuit integrity in wash-down or outdoor locations. Buyers who need a lower amperage rating or a different voltage configuration will need a separate model.

Highlights

  • Watertight reliability with IP67 and NEMA 4X rating
  • Industrial power handling at 100A and 250V AC
  • Rugged Zytel 101 nylon housing resists impact and chemicals
  • Wide operating range from -40°C to +75°C
  • Secure IEC grounded connection with shrouded contacts

Specifications

BrandHUBBELL
Color/FinishBlue
Color MappingBlue
TypeLight Switch

Questions about this item

Will the 100A 250V receptacle work with my existing 3 AWG feeder cables?

Yes, the screw terminals accept wire sizes from 3 AWG up to 1/0 AWG, so your 3 AWG conductors fit directly.

How can I verify the IP67 seal is intact after installation?

Check that the spring-loaded cap closes fully and the neoprene gasket sits evenly around the flange; a visual inspection confirms the watertight barrier.

Does the box include the mating plug or only the blue Zytel 101 nylon receptacle?

Only the flanged receptacle with self-closing gasketed cover is supplied; the matching IEC pin-and-sleeve plug must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.