Hubbell Incorporated
Hubbell Incorporated DR20GRY Straight Blade Receptacle 5-20R 20 A Gray
A grounded 20 A duplex receptacle with a gray nylon housing for 125 V AC flush mounting
- Color MappingGray
- TypeWiring Devices
- Rated for 20 A continuous load
- 125 V AC voltage rating matches standard circuits
- Grounded 5-20R configuration accepts NEMA 5-20P plugs
- Nylon housing meets UL 498 and CSA C22.2 standards
- Flush-mount single-gang design fits standard wall boxes
Hubbell 20 A Straight-Blade Receptacle
This Hubbell DR20GRY is a single-gang decorator duplex receptacle rated for 20 amperes at 125 volts AC. The straight-blade 5-20R configuration and grounded three-wire design suit commercial and residential branch circuits that require a 20 A outlet.
Suits 20 A flush-mount wiring jobs
Electricians wiring kitchens, workshops or light-commercial spaces where a 20 A grounded receptacle is specified will find this nylon-housed device compliant with UL 498, CSA C22.2 and Federal Specification W-C-596. Installers needing GFCI protection, a weather-resistant cover or a higher NEMA enclosure rating should select a different device.
Decisive spec: NEMA 5-20R 20 A rating
The 5-20R pin arrangement and 20 A current rating determine whether this receptacle matches the circuit breaker and plug types on the project. Verify the branch circuit is 20 A before installing.
Highlights
- Rated for 20 A continuous load
- 125 V AC voltage rating matches standard circuits
- Grounded 5-20R configuration accepts NEMA 5-20P plugs
- Nylon housing meets UL 498 and CSA C22.2 standards
- Flush-mount single-gang design fits standard wall boxes
Specifications
| Brand | HUBBELL WIRING DEVICE-KELLEMS |
|---|---|
| Color Mapping | Gray |
| Type | Wiring Devices |
Questions about this item
Does the DR20GRY generate noticeable heat or noise when powering a 20 A load continuously?
The receptacle is a passive wiring device with no moving parts or electronics, so it produces no audible noise and negligible heat under normal 20 A, 125 V AC operation.
What wiring and circuit components must already be in place for this 5-20R receptacle to function?
A 125 V AC single-phase circuit rated for 20 A, three-conductor cable (hot, neutral, ground), and a 20 A breaker are required; the device mounts in a standard flush box and accepts back or side wiring.
Will the DR20GRY work safely on a circuit that also feeds older 125 V receptacles rated for lower amperage?
Yes — it is a standard NEMA 5-20R duplex receptacle rated 20 A, 125 V AC, CSA certified and UL 498 listed, so it can share a properly protected 20 A branch circuit with other 125 V outlets.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



