We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White wall-mount occupancy vacancy sensor with single button

Hubbell Incorporated

Hubbell Incorporated AP2000W1 Wall Mount Sensor, Occupancy, Vacancy

SKU CH-Y719-JKTNK

Wall-mounted PIR occupancy and vacancy sensor controls fluorescent or incandescent loads up to 1,000 W at 120 V across 1,000 sq ft without a neutral wire

  • Detects motion across 1,000 sq ft with PIR technology
  • Controls fluorescent loads up to 1,000W at 120V AC
  • Handles incandescent loads up to 800W at 120V AC
  • Operates on 120 to 277V AC without neutral wire
  • Single-button occupancy and vacancy switching for simple control

Application Fit

The Hubbell Incorporated AP2000W1 is a wall-mounted motion sensor designed for occupancy and vacancy detection in commercial lighting circuits. It suits facilities managers and electricians who need automatic control of fluorescent or incandescent loads up to 1,000 square feet. The device operates on 120 to 277V AC and requires no neutral wire, simplifying retrofit installations. Its passive infrared technology provides reliable presence detection without a nightlight function.

Retrofit Scope

This sensor replaces manual wall switches or older single-button occupancy controls that lack vacancy mode or wide voltage compatibility. The upgrade is worthwhile when a project demands both auto-on and manual-on operating options in a single gang box. It supports fluorescent loads up to 1,000W at 120V and incandescent loads up to 800W, covering typical office and corridor fixtures. Hard-wired communication eliminates the need for wireless commissioning tools.

Sustained Operation

Under continuous use the passive infrared element maintains consistent detection across the 1,000 sq ft coverage zone without the sensitivity drift seen in some high-traffic areas. The absence of dimming circuitry means the relay contacts switch cleanly at full rated load, reducing contact wear over thousands of cycles. Hard-wired power ensures the sensor never loses its settings due to battery depletion or signal interference. The unit remains stable across the full 120 to 277V AC supply range.

Highlights

  • Detects motion across 1,000 sq ft with PIR technology
  • Controls fluorescent loads up to 1,000W at 120V AC
  • Handles incandescent loads up to 800W at 120V AC
  • Operates on 120 to 277V AC without neutral wire
  • Single-button occupancy and vacancy switching for simple control

Specifications

BrandHUBBELL WIRING DEVICE-KELLEMS

Questions about this item

What voltage range must the circuit provide for the AP2000W1 sensor?

The sensor operates on 120 to 277V AC, so the supply must fall within that range.

Which wiring step is often missed when installing this hard-wired PIR sensor?

Connecting the load wire to the correct terminal is the step most often missed; the sensor requires no neutral.

What is the maximum incandescent load the sensor can switch before the relay needs replacement?

The relay is rated for 800W incandescent at 120V AC; exceeding that will shorten its life.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.