We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular aluminium LED driver housing, grey finish, terminal blocks visible

Hubbell Incorporated

Hubbell Incorporated 96W LED Driver PLED96W-046-C2100-D-HV 2100mA 16-46V 277-480V

SKU CH-2E1H-V0DZG

96 W constant-current LED driver delivers 2100 mA across 16-46 Vdc with 0-10 V dimming, 277-480 V input, and UL hazardous-location rating

  • Delivers 96 watts total power for high-output LED arrays
  • Constant 2100 mA output current ensures stable illumination
  • 16-46 Vdc output range matches diverse LED modules
  • 277-480 V input suits industrial three-phase supplies
  • UL Type HL rated for hazardous location installation

96 W Constant-Current LED Driver

This 96-watt LED driver delivers a fixed 2100 mA output across a 16 to 46 Vdc range. It accepts 277 to 480 V input and provides 0-10 V dimming control. The aluminium housing carries UL Dry, Damp and Hazardous Location Type HL ratings. It suits commercial and industrial lighting projects that require constant-current operation at this power level.

Installers needing 2100 mA at 96 W

Contractors wiring fixtures that demand 2100 mA constant current within the 16-46 Vdc window will find this unit matches the load. It is not for fixtures requiring a different current setting or constant-voltage output. Projects limited to 277 V or lower supply voltages should verify compatibility. Buyers needing non-dimming or alternative dimming protocols must select another driver.

277-480 V input with 0-10 V dimming

The driver operates only on 277 to 480 V mains and includes 0-10 V dimming as its sole control method. This voltage range and dimming interface determine whether the unit integrates with the site electrical system and lighting controls. Confirm both parameters against the project specification before purchase.

Highlights

  • Delivers 96 watts total power for high-output LED arrays
  • Constant 2100 mA output current ensures stable illumination
  • 16-46 Vdc output range matches diverse LED modules
  • 277-480 V input suits industrial three-phase supplies
  • UL Type HL rated for hazardous location installation

Specifications

BrandHubbell

Questions about this item

What input voltage range does the 96 watt driver accept for a 277-480 V supply?

The driver operates on an input voltage of 277-480 V and delivers a constant 2100 mA output across a 16-46 Vdc range.

How is the 0-10 V dimming circuit wired to avoid reversed polarity on the control leads?

Connect the dimming positive to the violet lead and the dimming negative to the grey lead; reversing them disables dimming without damaging the driver.

When should the aluminium-housed driver be replaced if the output current drifts from 2100 mA?

Replace the unit if the measured output current falls outside the specified 2100 mA tolerance or if the housing shows corrosion that compromises the hazardous-location rating.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.