We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue thermoplastic IEC pin-and-sleeve receptacle with spring-loaded cap

Hubbell Incorporated

Hubbell HBL530R9W IEC Pin and Sleeve Receptacle 30A 208V

SKU CH-X0H3-SVF7F

Watertight IEC pin-and-sleeve receptacle rated 30 A at 120/208 V AC with IP67 and NEMA 4X protection

  • Color/FinishBlue
  • Color MappingBlue
  • TypeLight Switch
  • Watertight IP67 rating protects against dust and water ingress
  • 30 A current rating supports heavy-duty industrial loads
  • Spring-loaded cap maintains seal when not in use
  • Three-phase 120/208 V AC input suits industrial power systems
  • Thermoplastic blue housing resists corrosion in harsh environments

30 A 208 V IEC Pin-and-Sleeve Receptacle

This industrial receptacle provides a 30 A, 120/208 V AC connection with a four-pole, five-wire three-phase configuration. Its IP67 and NEMA 4X ratings suit wet or dusty environments where a watertight seal is required. The blue thermoplastic housing and spring-loaded cap protect the contacts when not in use. It is designed for panel or flange mounting in fixed installations.

IP67 sealing and thermoplastic housing under

The IP67 rating means the device withstands temporary immersion and high-pressure wash-down while carrying its rated 30 A current. Thermoplastic construction resists corrosion and impact in chemical or outdoor settings. The shrouded, straight-orientation pins maintain alignment during repeated mating cycles. No active cooling is needed because the receptacle is a passive wiring component.

Verify flange cut-out.

The flange face measures 3.88 in diameter, so the panel cut-out must match this dimension. Supply conductors must not exceed 8 AWG to fit the terminals correctly. A three-phase 120/208 V AC supply with a grounded neutral is required; single-phase circuits will not use all poles. Confirm the mounting surface is flat and rated for NEMA 4X conditions.

Highlights

  • Watertight IP67 rating protects against dust and water ingress
  • 30 A current rating supports heavy-duty industrial loads
  • Spring-loaded cap maintains seal when not in use
  • Three-phase 120/208 V AC input suits industrial power systems
  • Thermoplastic blue housing resists corrosion in harsh environments

Specifications

BrandHUBBELL
Color/FinishBlue
Color MappingBlue
TypeLight Switch

Questions about this item

Will the IP67 watertight seal stay reliable when the receptacle runs continuously at 30 A?

The IP67 rating means the housing is dust-tight and protected against temporary immersion, so the seal is designed to hold under continuous 30 A industrial loads.

What wiring must already be in place to install this IEC pin-and-sleeve receptacle?

You need a three-phase 120/208 V AC supply with five conductors up to 8 AWG and a flanged mounting surface for the straight-orientation housing.

Can I keep my existing 4X-rated enclosure and mount this 3.88-inch face receptacle inside it?

Yes — the receptacle carries its own NEMA 4X rating and a 3.88-inch face diameter, so it fits standard 4X enclosures without degrading the enclosure's protection.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.