We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver metal server drive cage with eight front-facing 2.5 inch hot-swap bays

HPE

HPE P27194-B21 8-bay 2.5" U.3 NVMe SATA SAS 24G tri-mode front drive cage server accessory

SKU CH-ATPM-QRHFN MPN P27194-B21

Eight-bay 2.5" front cage adds hot-swap U.3 NVMe, SATA and SAS 24G tri-mode storage to ProLiant DL300 Gen10 Plus 2U servers

  • TypeHard Drive Cage
  • SpecificationsHard Drive Form Factor Compatibility: 2.5" Supported Interfa
  • Tri-mode support lets you mix NVMe, SATA and SAS drives
  • 24 Gb/s SAS bandwidth keeps high-speed arrays responsive
  • Eight hot-swap 2.5" bays fit in a 2U front cage
  • U.3 x1 interface works with NVMe, SATA and SAS 4.0
  • Designed for ProLiant DL300 Gen10 Plus 2U servers

Eight-bay tri-mode cage for DL300 Gen10 Plus

The HPE P27194-B21 is a front-access drive cage that adds eight hot-swap 2.5-inch bays to a 2U ProLiant DL300 Gen10 Plus chassis. Each bay accepts U.3 NVMe x1, SATA-600 or SAS 4.0 drives, so administrators can mix flash and capacity media without changing hardware. The kit is aimed at IT teams expanding local storage density in existing 2U servers.

Fits a single 2U front slot

Installation consumes one front cage position and connects to the server's tri-mode backplane through SFF-8639 connectors. No additional CPU, memory or PCIe cards are required; the cage draws power and signal through the backplane it plugs into. This frees PCIe slots for networking or acceleration cards while keeping all storage cabling internal.

Passive cooling relies on chassis airflow

The cage itself has no fans or active components, so thermal performance and acoustics depend entirely on the host server's front fans. In normal operation it adds negligible power draw beyond the installed drives, leaving the system's thermal headroom unchanged. Builders must ensure the chassis fan profile can sustain the aggregate drive load.

Highlights

  • Tri-mode support lets you mix NVMe, SATA and SAS drives
  • 24 Gb/s SAS bandwidth keeps high-speed arrays responsive
  • Eight hot-swap 2.5" bays fit in a 2U front cage
  • U.3 x1 interface works with NVMe, SATA and SAS 4.0
  • Designed for ProLiant DL300 Gen10 Plus 2U servers

Specifications

BrandHPE
ModelP27194-B21
TypeHard Drive Cage
SpecificationsHard Drive Form Factor Compatibility: 2.5"
Supported Interface: U.3 NVMe x1 / SATA-600 / SAS 4.0
Features: Front, tri-mode
Processor: No CPU
Bays: 8 x hot-swap - 2.5" SFF
Interfaces: 8 x U.3 NVMe x1 / SATA 6Gb/s / SAS 24Gb - U.3 (SFF-8639)
Shipping weight2.27 kg
Package size457 × 356 × 203 mm

Questions about this item

How many U.3 NVMe x1 lanes does each of the eight 2.5" bays provide?

Each bay supplies a single U.3 NVMe x1 lane alongside SATA-600 and SAS 4.0 connectivity.

What thermal or power limits appear when the cage runs all day with eight drives?

The kit has no onboard cooling or power regulation; it relies on the host chassis airflow and backplane supply.

Which server backplane and controller combination is required to use the tri-mode 24G SAS links?

The cage is built for HPE ProLiant DL300 Gen10 Plus 2U systems with a compatible tri-mode controller.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.