We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small white rectangular PoE injector with two Ethernet ports

HPE Networking Instant On

HPE Networking Instant On R6P68A PoE Injector 15.40W

SKU CH-J57D-VD0PF MPN R6P68A

Delivers 15.40 W of PoE power over a single Ethernet port for compatible Aruba access points and the HPE 501 Wireless Client Bridge, compliant with IEEE 802.3af

  • TypeRack Enclosure
  • Delivers 15.40 W PoE power to compatible access points
  • Single Ethernet input simplifies cabling for remote deployments
  • IEEE 802.3af certified for safe, standards-based operation
  • Works with Aruba AP and IAP models including 303, 304, 305, 314, 315, 365, 367, 504, 505, 567
  • Supports HPE 501 Wireless Client Bridge for extended connectivity

HPE Instant On PoE Injector 15.40W

This injector delivers 15.40 watts of Power over Ethernet from a single standard Ethernet input. It is designed for network administrators deploying compatible Aruba access points or the HPE 501 Wireless Client Bridge where AC power is unavailable at the device location.

IEEE 802.3af power limit and single-port design

The unit complies with the IEEE 802.3af standard, capping output at 15.40 watts per port. It provides exactly one PoE output from one Ethernet input, so each powered device requires its own injector and a separate switch port for data backhaul.

Replaces midspan units for listed Aruba models

This injector replaces generic midspan solutions for the specific Aruba access points listed in the compatibility data, including AP-303, AP-304, AP-305, AP-314, AP-315, AP-365, AP-367, AP-504, AP-505, AP-567 and IAP variants. The upgrade is worthwhile when a managed PoE switch is not present and a standards-compliant, single-device power source is needed.

Highlights

  • Delivers 15.40 W PoE power to compatible access points
  • Single Ethernet input simplifies cabling for remote deployments
  • IEEE 802.3af certified for safe, standards-based operation
  • Works with Aruba AP and IAP models including 303, 304, 305, 314, 315, 365, 367, 504, 505, 567
  • Supports HPE 501 Wireless Client Bridge for extended connectivity

Specifications

TypeRack Enclosure
Shipping weight0.45 kg
Package size144 × 52 × 38 mm

Questions about this item

Is the 15.40 W output enough for an AP-305 or should I look for a higher-wattage model?

The injector delivers 15.40 W, matching the IEEE 802.3af limit, so it powers any listed access point that draws up to that level including the AP-305.

What does the 15.40 W rating mean when the injector is connected to an access point?

It is the maximum power the injector can supply over the PoE port; the connected access point will draw only what it needs up to that ceiling.

Does the single Ethernet input and PoE output use the 802.3af standard or a proprietary scheme?

It follows IEEE 802.3af, so the PoE output is limited to 15.40 W and works with any compliant device on the compatibility list.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.