We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular metal server power module with IEC C14 inlet

HPE

HPE 830219-001 900 W power module

SKU CH-9DZY-E1SRQ

A 900 W power module accepting 120 V AC, 230 V AC, 180 V DC and 320 V DC input with an IEC 60320 C14 receptacle and RoHS certification

  • MaterialMetal
  • Delivers 900 W output for demanding server workloads
  • Accepts 120 V AC, 230 V AC, 180 V DC and 320 V DC input ranges
  • Uses IEC 60320 C14 receptacle for standard rack cabling
  • RoHS certified for environmentally responsible deployment
  • Metal construction ensures durability in data-centre environments

HPE 830219-001 900 W power module

The HPE 830219-001 is a 900 W power module built for HPE ProLiant DL20 Gen9 servers. It accepts 120 V AC, 230 V AC, 180 V DC and 320 V DC input through an IEC 60320 C14 receptacle. The metal chassis meets RoHS environmental standards.

Suitable for DL20 Gen9 replacements.

This module fits HPE ProLiant DL20 Gen9 systems requiring a direct 900 W replacement. Builders working with different server models, alternate form factors or non-HPE platforms should look elsewhere because the mechanical and electrical interface is specific to that generation.

900 W output with multi-voltage input

The unit delivers 900 W across four input ranges: 120 V AC, 230 V AC, 180 V DC and 320 V DC. Confirm that your infrastructure supplies one of these voltages and uses an IEC 60320 C14 connection before ordering.

Highlights

  • Delivers 900 W output for demanding server workloads
  • Accepts 120 V AC, 230 V AC, 180 V DC and 320 V DC input ranges
  • Uses IEC 60320 C14 receptacle for standard rack cabling
  • RoHS certified for environmentally responsible deployment
  • Metal construction ensures durability in data-centre environments

Specifications

BrandHPE
MaterialMetal

Questions about this item

How do I install the 830219-001 power module in a DL20 Gen9 server and what step is often missed?

Slide the module into the rear bay until the latch clicks, then connect the IEC 60320 C14 cord; the step often missed is fully seating the latch so the module locks into the chassis power bus.

What maintenance or replacement will the 900 W module need over its service life?

The internal fan bearings are the primary wear item; plan to replace the entire module when airflow drops or bearing noise appears, as HPE does not sell a separate fan kit for this unit.

At what point does the 900 W module hit its limit during sustained full-load operation?

Continuous 900 W output is the hard ceiling; if the combined server draw reaches 900 W the module will trip its over-current protection and shut down.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.