We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
HP internal power cord for Serial ATA controller LED, black cable with connectors

HP

HP Internal Power Cord for Serial ATA Controller LED

SKU CH-TMH0-EZ508

Powers the LED indicator on a Serial ATA controller with an HP internal cord

  • TypeInternal Power Cord
  • Powers Serial ATA Controller LED reliably
  • HP genuine part ensures exact fit
  • Internal power cable for controller LED
  • Connects LED to Serial ATA controller
  • New condition guarantees clean connections

HP Serial ATA Controller LED Power Cord

This internal power cord is manufactured by HP for use with Serial ATA controller LEDs. It delivers the required power connection between the controller board and its integrated LED indicator. The cable suits technicians and builders who are assembling or servicing compatible HP systems that use this specific LED signalling arrangement. It is a direct replacement part rather than a general-purpose accessory.

Steady power delivery to controller LED

Under continuous operation the cord maintains a stable feed to the controller LED without voltage drop that would cause flickering or signal loss. The conductors are sized for the low-current LED load so temperature rise remains minimal even during prolonged system uptime. No active cooling or derating is required because the current profile stays constant. Reliability depends on secure seating at both ends of the run.

Keyed connectors prevent misalignment

The cable terminates in keyed plugs that match the controller and LED headers exactly, eliminating the risk of reversed polarity or offset pin engagement. Moulded strain relief at each end protects the solder joints from fatigue when the chassis is moved or vibration occurs. Routing is simplified by the flexible jacket, which bends around drive cages and motherboard components without kinking. The length supplied fits the standard internal layout for the supported HP platforms.

Highlights

  • Powers Serial ATA Controller LED reliably
  • HP genuine part ensures exact fit
  • Internal power cable for controller LED
  • Connects LED to Serial ATA controller
  • New condition guarantees clean connections

Specifications

BrandHP
TypeInternal Power Cord

Questions about this item

Does the HP Internal Power Cord draw measurable power or generate heat when the Serial ATA controller LED runs continuously?

The cord is a passive internal cable that carries power to the LED; it adds no active circuitry, so it does not draw measurable power itself and produces no heat beyond normal conductor warmth.

What must I already own to connect the HP Internal Power Cord to the controller LED?

You need a compatible Serial ATA controller that provides the matching power header and an LED module designed for that controller.

Will the HP Internal Power Cord work with an older controller I plan to keep in the same system?

The cord is specified for Serial ATA controller LED use; it will function with any controller that presents the same power-header pin-out and voltage for the LED.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.