HP
HP Aruba JW015A AP-ANT-35A network antenna
Indoor/outdoor MIMO antenna with 90° beamwidths, 5 dBi gain and RP-SMA connectors for 2.4 and 5 GHz coverage
- TypeAntenna
- Indoor/outdoor coverage with 90° H x 90° V beamwidth
- Dual-band operation across 2.40 GHz and 4.90 GHz ranges
- 5 dBi gain improves signal reach for wireless networks
- RP-SMA connector ensures direct compatibility with Aruba access points
- Pole or wall mounting fits 7.87" x 7.87" x 1.26" form factor
Indoor/Outdoor MIMO Antenna
The Aruba AP-ANT-35A is a multi-polarised antenna built for indoor and outdoor wireless data networks. It covers 2.4 GHz to 5 GHz and 4.90 GHz to 6 GHz bands with a nominal 90° H x 90° V beamwidth. The unit mounts on a pole or wall and weighs approximately 1.65 lb. An RP-SMA connector provides the radio link.
Suits Sector Coverage Deployments
This antenna suits installers who need broad sector coverage for Aruba access points in mixed environments. It is not for buyers who want a narrow high-gain beam for long-distance point-to-point links. It is not for installations that require a connector type other than RP-SMA. It is not for deployments operating outside the listed frequency ranges.
5 dBi Gain Defines Coverage Pattern
The 5 dBi gain sets the reach and spread of the sector pattern for 2.4 and 5 GHz access. This figure determines whether the antenna matches the cell size and client density required for the site. Verify the gain requirement against the site survey before ordering.
Highlights
- Indoor/outdoor coverage with 90° H x 90° V beamwidth
- Dual-band operation across 2.40 GHz and 4.90 GHz ranges
- 5 dBi gain improves signal reach for wireless networks
- RP-SMA connector ensures direct compatibility with Aruba access points
- Pole or wall mounting fits 7.87" x 7.87" x 1.26" form factor
Specifications
| Brand | Aruba |
|---|---|
| Type | Antenna |
| Shipping weight | 0.91 kg |
| Package size | 203 × 203 × 51 mm |
Questions about this item
Does the JW015A come with mounting hardware or must I buy a pole bracket separately?
The antenna is designed for pole or wall mounting and weighs 1.65 lb; mounting brackets are not included in the box and must be sourced separately.
The spec sheet lists two frequency ranges — 2.40 to 5 GHz and 4.90 to 6 GHz — which one should I pick for my Aruba AP?
Both ranges are supported simultaneously; the antenna covers 2.4 GHz and 5 GHz Wi-Fi bands plus the 4.90 to 6 GHz public-safety band, so a single unit serves all three.
What does the 5 dBi gain actually deliver when the AP-ANT-35A is mounted on a mast?
At 5 dBi the antenna focuses energy into a 90° horizontal by 90° vertical sector, roughly doubling effective range compared with a standard dipole while keeping coverage wide.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
