HP
HP 853605-001 65 W 19.5 V 3.33 A power adapter 7.4 x 5.0 mm
Delivers 65 W at 19.5 V 3.33 A through a 7.4 x 5.0 mm tip for HP laptops
- Delivers 65 W to run and charge HP laptops
- 5 V 3.33 A output matches original charger spec
- 4 × 5.0 mm barrel fits compatible HP models
- 100–240 V 50–60 Hz input works worldwide
- Built-in protection against short circuit and overheating
HP 853605-001 65 W adapter
This 65 W HP power adapter supplies 19.5 V at 3.33 A through a 7.4 x 5.0 mm connector. It is built for HP laptops that require this exact tip size and wattage. The unit accepts a universal 100-240 V input at 50-60 Hz for worldwide use.
Installation and common issues
Plug the barrel tip firmly into the laptop power jack until it seats securely; a loose fit can cause intermittent charging. Verify that the laptop’s required voltage and wattage match the adapter’s 19.5 V 65 W rating before connecting. The supplier tests each unit for damaged wires, cracked housings and internal debris to reduce failure risk.
Capacity and headroom
The adapter delivers a steady 65 W output for typical productivity workloads and battery charging. It will not sustain higher-power configurations that demand more than 65 W, so systems with discrete graphics or heavy multi-core loads may throttle or drain the battery under load. The 100-240 V input range handles global mains voltages without a separate converter.
Highlights
- Delivers 65 W to run and charge HP laptops
- 5 V 3.33 A output matches original charger spec
- 4 × 5.0 mm barrel fits compatible HP models
- 100–240 V 50–60 Hz input works worldwide
- Built-in protection against short circuit and overheating
Specifications
| Model | 0 |
|---|
Questions about this item
How can I confirm the adapter is delivering the correct 19.5 V 3.33 A output after connecting it?
The laptop should charge normally and the power LED will light; a multimeter on the 7.4 x 5.0 mm tip should read 19.5 V with no load.
What comes in the box and do I need to buy a mains lead separately?
The adapter unit with fixed 7.4 x 5.0 mm DC cable is supplied; a standard IEC C5 "cloverleaf" mains cable for 100-240 V input is not included.
Which part number should I choose — 853605-001 or 854117-850 — for a 65 W HP laptop?
Both numbers refer to the same 65 W 19.5 V 3.33 A unit with a 7.4 x 5.0 mm tip; either will work if your laptop requires that connector and wattage.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



