We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Vertical rackmount PDU with 20 outlets, black metal finish

HP

HP 7.3kVA 230V 20 Outlet Basic PDU

SKU CH-1FCW-95MSB

Distributes 7.3 kVA at 230 V through 20 outlets in a vertical rack-mount PDU

  • FeaturesForm Factor:Vertical Rackmount Product Type:PDU Form Factor:
  • Weight8.64 lb
  • Delivers up to 7.3 kVA for high-density racks
  • 20 outlets provide ample connections for multiple devices
  • Vertical rackmount form factor saves valuable rack space
  • Compatible with HP and third-party racks for flexible deployment
  • Weighs 8.64 lb for manageable installation and handling

Vertical rackmount PDU for data-centre racks

The HP 7.3kVA 230V Basic PDU delivers 20 outlets in a vertical form factor rated for up to 7.3 kVA. It targets administrators who need dense, single-phase power distribution inside standard server cabinets without metering or switching features. The unit supports high-density deployments where outlet count and reliable delivery matter more than remote management.

Tool-less mounting with reversible orientation

The low-profile single-piece chassis slides into HP racks and most third-party cabinets using integrated brackets that require no extra hardware. Outlets can face the rear for service clearance or inward when two units are mounted side-by-side for maximum density. Installers must verify rack depth and bracket alignment before securing the PDU to avoid blocked access to rear equipment.

Single-phase 230V capacity ceiling

The 7.3 kVA rating at 230 volts defines the hard limit for connected load; exceeding it trips the upstream breaker. The Basic series offers no per-outlet monitoring, load balancing or remote reboot, so capacity planning must be done manually. Buyers who need outlet-level telemetry, environmental sensors or phased upgrade paths should look beyond this model.

Highlights

  • Delivers up to 7.3 kVA for high-density racks
  • 20 outlets provide ample connections for multiple devices
  • Vertical rackmount form factor saves valuable rack space
  • Compatible with HP and third-party racks for flexible deployment
  • Weighs 8.64 lb for manageable installation and handling

Specifications

BrandHP
FeaturesForm Factor:Vertical Rackmount
Product Type:PDU
Form Factor:Vertical Rackmount
Product Name:7.3kVA 230 Volt 20 Outlet INTL Basic Power Distribution Unit
Weight8.64 lb

Questions about this item

How can I confirm the PDU is delivering 230 V power to connected equipment after installation?

Check the input and output voltage readings on the unit's display or use a multimeter at each of the 20 outlets to verify 230 V is present under load.

What comes in the box with the HP 7.3kVA Basic PDU and what must I purchase separately?

The unit ships with mounting brackets for vertical rackmount installation; input power cords and any additional rack hardware are not included and must be sourced separately.

Which capacity should I choose between the 1.9 kVA and 19.9 kVA models for a rack needing 7.3 kVA at 230 V?

Select the 7.3 kVA model; it matches the required power level exactly and provides 20 outlets, while the 1.9 kVA unit would be undersized and the 19.9 kVA unit would exceed the need.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.