HP
HP 397415-B21 8GB DDR2 667MHz Fully Buffered server RAM
Refurbished 8 GB DDR2 fully buffered kit with two 4 GB modules running at 667 MHz for compatible HP ProLiant servers
- Capacity8GB (2 x 4GB)
- Type240-Pin DDR2 SDRAM
- SpeedDDR2 667 (PC2 5300)
- CAS LatencyCL5
- Buffered/RegisteredFully Buffered
- 8 GB total capacity with two 4 GB modules
- Fully Buffered DDR2 signal processing for server stability
- 667 MHz DDR2 speed rated PC2-5300
- 240-pin DDR2 form factor fits compatible HP ProLiant servers
- Tested compatibility with ML370 G5, BL460c, BL480c and DL360 G5
HP 8GB DDR2 Fully Buffered Kit
This refurbished HP 397415-B21 kit provides 8GB of DDR2 memory across two 4GB modules for compatible ProLiant servers. It targets administrators maintaining legacy systems that require fully buffered DIMMs.
240-Pin Registered Design
The 240-pin DDR2 SDRAM modules use fully buffered signal processing to reduce electrical load on the server memory bus. Registered operation adds a clock cycle but improves stability in multi-module configurations typical of the listed ProLiant models.
DDR2-667 PC2-5300 Limits
The DDR2-667 standard caps bandwidth at the PC2-5300 rate and the CL5 latency is fixed by the module design. Systems needing higher throughput or lower latency must move to a newer memory generation not supported by these platforms.
Highlights
- 8 GB total capacity with two 4 GB modules
- Fully Buffered DDR2 signal processing for server stability
- 667 MHz DDR2 speed rated PC2-5300
- 240-pin DDR2 form factor fits compatible HP ProLiant servers
- Tested compatibility with ML370 G5, BL460c, BL480c and DL360 G5
Specifications
| Brand | HP |
|---|---|
| Model | 397415-B21 |
| Capacity | 8GB (2 x 4GB) |
| Type | 240-Pin DDR2 SDRAM |
| Speed | DDR2 667 (PC2 5300) |
| CAS Latency | CL5 |
| Buffered/Registered | Fully Buffered |
| Shipping weight | 0.91 kg |
| Package size | 254 × 203 × 152 mm |
Questions about this item
What bandwidth does the DDR2-667 PC2-5300 interface deliver?
The DDR2-667 standard (PC2-5300) provides a peak transfer rate of 5300 MB/s per module.
Will these 240-pin DIMMs fit a standard server board?
Yes, they use the 240-pin DDR2 form factor and are fully buffered, so the motherboard must support FB-DIMM slots.
How are the two 4 GB modules installed and what is the common mistake?
Insert both modules into matched channel slots (usually same-coloured banks) and press until the clips lock; the error is populating mismatched banks.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink
Intel HNS2600BPS24R 2U barebone pc dual Xeon DDR4 2.80 TB C622
- Xeon Bronze Xeon Go…
- DDR4-2933/PC4-23466



