HP
HP 0957-2084 Power Adapter +32V 720mA +16V 610mA 3-pin
Supplies +32 V 720 mA and +16 V 610 mA from 100–240 V AC input with a 3-pin plug and included power cord
- Worldwide voltage support from 100-240V input
- Dual output rails deliver +32V 720mA and +16V 610mA
- Ready to use with included power cord
- Genuine HP adapter tested for full functionality
- Built-in safeguards against incorrect voltage and short circuit
Power adapter for HP equipment
This genuine HP power adapter delivers dual regulated outputs of +32V at 720mA and +16V at 610mA. It accepts a universal 100-240V input at 50-60Hz, making it suitable for worldwide mains supply. A power cord is included in the package. The unit is tested and guaranteed fully functional.
Who this suits and who it does not
It suits owners of HP devices that require exactly these two DC voltages and the 3-pin connector. It will not suit buyers who need a single-voltage adapter or a different output polarity. Builders requiring higher current ratings or alternative connector types should look at other models.
Critical specification: dual-output voltages
The defining specification is the simultaneous +32V and +16V output on a 3-pin plug. Both voltages must match the device label exactly; a mismatch will prevent correct operation. Verify the original adapter part number 0957-2084 before ordering.
Highlights
- Worldwide voltage support from 100-240V input
- Dual output rails deliver +32V 720mA and +16V 610mA
- Ready to use with included power cord
- Genuine HP adapter tested for full functionality
- Built-in safeguards against incorrect voltage and short circuit
Specifications
| Model | 0957-2084 |
|---|
Questions about this item
What mains voltage range must my outlet provide for the HP 0957-2084 adapter?
The adapter accepts 100-240V AC at 50-60Hz, so it works on standard household outlets worldwide without a voltage converter.
Will the 3-pin plug on this HP 0957-2084 fit the power jack on my older HP device?
The adapter uses a 3-pin connector; verify that your device’s DC input jack matches this pin layout before connecting.
How can I confirm the HP 0957-2084 is delivering the correct +32V 720mA and +16V 610mA outputs after setup?
Measure each output rail with a multimeter; you should read approximately +32V and +16V DC under load, indicating proper operation.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114223BTC
In stock
