We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 18 in cable with XLR female to 3.5 mm TRS male connectors

Hosa Technology

Hosa Technology MIT-156 18 in XLR3F to 3.5mm TRS instrument cable

SKU CH-SQ3P-Y47FX MPN MIT-156

An 18 in impedance transformer cable with XLR female to 3.5 mm TRS male connectors that maximises signal fidelity and eliminates noise from impedance mismatches

  • ColorBlack
  • Length18 in
  • Connector Number2
  • Connector DetailXLR Female to 3.5 mm TRS Male
  • Terminal GenderFemale to Male
  • FeaturesMaximizes signal fidelity when using impedance mismatched ge
  • Preserves signal fidelity with impedance-mismatched gear
  • Reduces high-frequency loss from signal reflections
  • Cuts noise and hum caused by impedance mismatch
  • 18 in cable with XLR3F to 3.5 mm TRS connectors
  • Female-to-male design for direct instrument connection

Purpose and Audience

The Hosa MIT-156 is an 18 inch impedance‑matching cable that converts a 3.5 mm TRS male source to an XLR3 female input. It is built for musicians, engineers and content creators who need clean signal transfer between unbalanced and balanced professional audio gear.

Setup Check

Verify that your source device outputs an unbalanced 3.5 mm TRS signal and that the destination accepts a balanced XLR female connection. Ensure the cable length of 18 inches suits the spacing of your rack, interface or pedalboard before ordering.

What the Transformer Changes

The built‑in transformer maximizes signal fidelity when connecting impedance‑mismatched equipment. It minimizes high‑frequency and level loss caused by signal reflections and eliminates noise and hum that typically arise from an impedance mismatch.

Highlights

  • Preserves signal fidelity with impedance-mismatched gear
  • Reduces high-frequency loss from signal reflections
  • Cuts noise and hum caused by impedance mismatch
  • 18 in cable with XLR3F to 3.5 mm TRS connectors
  • Female-to-male design for direct instrument connection

Specifications

BrandHosa
ModelMIT-156
ColorBlack
Length18 in
Connector Number2
Connector DetailXLR Female to 3.5 mm TRS Male
Terminal GenderFemale to Male
FeaturesMaximizes signal fidelity when using impedance mismatched gear
Minimizes high frequency and level loss caused by signal reflections
Eliminates noise and hum caused by an impedance mismatch
Shipping weight0.16 kg
Package size102 × 76 × 25 mm

Questions about this item

Does the 18 in cable come with any adapters or do I need to buy them separately?

The box contains the single MIT-156 cable with an XLR3F connector on one end and a 3.5 mm TRS male plug on the other; no extra adapters are included.

Should I choose the MIT-156 or a straight XLR-to-TRS cable for my setup?

Pick the MIT-156 when you need to match a high-impedance instrument output to a low-impedance XLR input; a straight cable will not correct the impedance mismatch.

What does the impedance-transformer function do to the signal in a real recording chain?

It converts the high-impedance instrument signal to low impedance, preserving high-frequency detail and level while removing hum caused by the mismatch.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.