We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black cables with right-angle 6.35mm plugs and silver XLR sockets

Hosa 2 Pack XLR Female to Right Angle 1/4 TRS Cable 1ft

SKU CH-0VTR-76MWK

Two 1 ft balanced cables connect XLR female to right-angle 6.35 mm TRS male with 20 AWG 6N silver-plated copper and braided shield

  • TypeXLR
  • ColorBlack
  • Connector Number2
  • Terminal GenderMale to Female
  • SpeedTest Value
  • SpecificationsBlue, Male-to-Female, Round, HUALEU
  • Balanced 6N silver-plated conductors minimise interference
  • Right-angle 6.35 mm plug fits tight mixer jacks
  • Gold-plated 1/4" and silver-plated XLR contacts resist corrosion
  • Heavy-duty zinc alloy housings protect against daily wear
  • Flexible .23 in rubber sheath eases stage routing

Balanced Audio Cable Pair

This two-pack supplies balanced XLR female to right-angle 1/4-inch TRS cables for professional audio connections. Each lead measures one foot and uses 20 AWG 6N silver-plated oxygen-free copper conductors with a tin-plated copper braid shield. Gold-plated 1/4-inch plugs and silver-plated XLR contacts resist oxidation. A soft rubber jacket of 0.23-inch diameter adds flexibility.

Studio And Stage Wiring

The right-angle 1/4-inch plug suits tight mixer inputs, rack patches or stage boxes where straight connectors would protrude. Balanced wiring rejects noise on long runs between microphones, mixers, audio players or power amplifiers. Buyers needing extended reach for microphone placement or remote recording should choose longer cables. Installations requiring straight 1/4-inch or XLR male terminations need different connectors.

20 AWG 6N Silver-Plated Conductors

The cable core uses 20 AWG 6N silver-plated oxygen-free copper to minimise resistance and preserve signal detail. This conductor specification determines whether the lead meets the fidelity and interference-rejection demands of critical studio or live-sound applications.

Highlights

  • Balanced 6N silver-plated conductors minimise interference
  • Right-angle 6.35 mm plug fits tight mixer jacks
  • Gold-plated 1/4" and silver-plated XLR contacts resist corrosion
  • Heavy-duty zinc alloy housings protect against daily wear
  • Flexible .23 in rubber sheath eases stage routing

Specifications

BrandHosa
TypeXLR
ColorBlack
Connector Number2
Terminal GenderMale to Female
SpeedTest Value
SpecificationsBlue, Male-to-Female, Round, HUALEU
Sports Team2 Piece
Refresh Rate60 hertz
FeaturesHUALEU, Blue, Male-to-Female, Round

Questions about this item

How do I plug the right-angle 1/4 TRS end into a crowded mixer panel without bending the cable?

Align the 6.35 mm right-angle plug so the cable exits toward the chassis, then push straight in until the gold-plated tip seats fully; forcing it sideways stresses the solder joints inside the zinc-alloy shell.

What part of this 1 ft cable will wear out first after months of stage use?

The tin-plated copper braid shield and 20 AWG silver-plated conductors stay flexible, but the soft rubber jacket at the bend point near the right-angle plug will show abrasion first.

At what length does signal loss become noticeable on this balanced run?

At 1 foot the 20 AWG 6N silver-plated oxygen-free copper keeps resistance negligible, so the practical limit is the connector contact — clean the gold-plated 1/4 tip and silver-plated XLR pins if noise appears.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.