We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black plastic adapter with USB-C and USB 3.0 plugs, IDE and SATA connectors, and a 12V power jack

Hitoor

Hitoor USB 3.0 & Type-C to IDE SATA Hard Drive Adapter

SKU CH-XXGD-KY9J2

Connects 2.5" and 3.5" SATA or IDE drives via USB 3.0 and Type-C with a 12V power adapter for up to 5Gbps transfer

  • ColorBlack
  • Connector A1 x USB C/USB 3.0
  • Connector B1 x IDE/SATA
  • FeaturesPLUG & PLAY DRIVERLESS OPERATION
  • Package Quantity1
  • Connect 2.5" and 3.5" SATA or IDE drives via USB 3.0 and Type-C
  • Transfer data at up to 5 Gbps with UASP acceleration
  • Included 12 V / 2 A power adapter runs 3.5" desktop drives
  • Plug-and-play driverless operation with hot-swap support
  • Dual 40-pin and 44-pin IDE plus SATA III connectors for wide compatibility

Universal Hard Drive Reader

The Hitoor adapter connects 2.5 and 3.5 SATA or IDE drives to a computer through USB 3.0 or USB C. It suits anyone who needs to recover files from old laptop or desktop disks without installing them internally. The kit includes a 12V 2A power supply for 3.5 drives and a dual head IDE cable covering 40pin and 44pin connectors. Plug and play operation works on Windows 10 11 and Mac OS with no drivers required.

Upgrade From USB 2.0 Dock

Replacing a USB 2.0 dock with this USB 3.0 model cuts large transfer times when moving photo libraries or system images. The jump is worth it when you handle 3.5 desktop drives that need the included 12V adapter or when you swap between multiple SATA and IDE disks using hot swap. If you only move small documents occasionally the speed gain may not justify the change.

USB 3.2 Gen 1 Limits

The USB 3.2 Gen 1 interface caps throughput at 5Gbps so SATA III drives cannot reach their native 6Gbps ceiling. UASP support reduces protocol overhead but does not lift the bus limit. Real world speed also depends on the host controller and the drive itself. The adapter is not suited for booting an operating system or for sustained heavy workloads that exceed the USB bandwidth.

Highlights

  • Connect 2.5" and 3.5" SATA or IDE drives via USB 3.0 and Type-C
  • Transfer data at up to 5 Gbps with UASP acceleration
  • Included 12 V / 2 A power adapter runs 3.5" desktop drives
  • Plug-and-play driverless operation with hot-swap support
  • Dual 40-pin and 44-pin IDE plus SATA III connectors for wide compatibility

Specifications

ColorBlack
Connector A1 x USB C/USB 3.0
Connector B1 x IDE/SATA
FeaturesPLUG & PLAY DRIVERLESS OPERATION
Package Quantity1

Questions about this item

What power supply does the 3.5" drive connection need?

The kit includes a 12V/2A power adapter with a DC-Jack port to run 3.5" desktop drives.

Which cable ends plug into the computer and the drives?

The USB-C/USB 3.0 combo cable connects to the host, while the dual-head IDE connector (40pin and 44pin) and the SATA III connector attach to the drives.

What indicates the adapter is receiving power?

A built-in LED lights up when the 12V/2A power adapter is connected and the unit is powered on.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.