We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Hitoor

Hitoor 5-Pack 120mm RGB Case Fan with Remote Controller

SKU CH-KYQV-JKFXB

A five-fan set delivers 38 CFM airflow at 1300 RPM with fluid-dynamic bearings rated for 40000 hours, includes an RF remote for RGB control and eight anti-vibration pads for quiet operation at 25 dBA

  • TypeCase Fan
  • Bearing TypeFluid Dynamic
  • Air Flow30-35 CFM
  • Noise Level20 - 25 dBA
  • Power Connector3 / 4 Pin
  • ColorBlack / White

Model 5 Fan Pack

Option 5 Fans w/ Controller

  • Quiet operation at 20-25 dBA noise level
  • RGB lighting with remote control for colour adjustment
  • Five 120 mm fans deliver 30-35 CFM airflow each
  • Fluid dynamic bearing rated for 40000 hours life
  • Anti-vibration rubber pads reduce chassis resonance

Five-pack RGB cooling kit

The Hitoor five-pack supplies five 120 mm RGB case fans and a single RF remote controller. Fluid-dynamic bearings and a rated 40000-hour lifespan target builders who want coordinated lighting across multiple intake or exhaust positions. Each fan draws 4.2 W and spins at up to 1300 RPM, delivering between 30 and 38 CFM at 20 to 25 dBA.

Straightforward mounting with vibration control

Each fan includes four pre-installed anti-vibration rubber pads that isolate the 120x120x25 mm frame from the chassis. The 6-pin power connector plugs into the supplied remote receiver, so colour and speed changes are handled wirelessly without additional software or motherboard headers. Ensure the receiver has a clear line of sight to the remote for reliable operation.

Verify clearance and power before ordering

Confirm your case accepts 120 mm fans at the intended mounting points and that the 25 mm thickness does not foul cables or drive cages. The kit uses a proprietary 6-pin link to the remote box, so no standard 3-pin or 4-pin motherboard headers are required for RGB control. Buyers who need PWM speed curves tied to CPU temperature should note the remote handles all adjustments.

Highlights

  • Quiet operation at 20-25 dBA noise level
  • RGB lighting with remote control for colour adjustment
  • Five 120 mm fans deliver 30-35 CFM airflow each
  • Fluid dynamic bearing rated for 40000 hours life
  • Anti-vibration rubber pads reduce chassis resonance

Specifications

TypeCase Fan
Bearing TypeFluid Dynamic
Air Flow30-35 CFM
Noise Level20 - 25 dBA
Power Connector3 / 4 Pin
ColorBlack / White
LEDRGB

Other versions of this model

3 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How can I confirm the fans are running at the correct 1300 RPM after installation?

Check the fan speed reading in your BIOS or monitoring software; it should report 1300 RPM. Visually verify the RGB lighting responds to the remote controller and listen for the quiet 25 dBA noise level.

Which items are included in the 5-pack box and what extra parts might I need?

The box contains five 120mm RGB fans and one RF remote controller. You will need available 3-pin or 4-pin motherboard headers for power and a 6-pin connection for the RGB lighting.

The listing shows black or white frames — which colour should I choose for my build?

Choose black frames for a stealth look inside dark cases or white frames to match light-themed builds; both versions share identical 38 CFM airflow, 4.2 W power draw and 40000-hour fluid bearing life.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.