We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of thin rectangular patch antennas with adhesive backing and 40cm cables

HighZer0 Electronics

HighZer0 Electronics RFANT09Z+M1 WiFi Patch Antenna Pair 40cm

SKU CH-Q957-ZGKFC

Replaces weak or missing internal WiFi antennas on mini-PCIe cards with a 40cm adhesive-backed pair for 2.4GHz, 5GHz, 5.8GHz and 6GHz

  • TypeWireless Card Antenna
  • ColorMulticoloured
  • FeaturesLightweight,Flexible,Adhesive Backing
  • Upgrade weak or missing internal WiFi with 2.5dBi gain omnidirectional antenna pair
  • Compatible with IPEX1, MHF1 and U.FL connectors on mini-PCIe cards like 7260HMW
  • Supports 2.4GHz, 5GHz, 5.8GHz and 6GHz WiFi and Bluetooth applications
  • 40cm low-loss RF1.13 cables with adhesive backing for concealed internal routing
  • Not compatible with IPEX4 or MHF4 connectors on M.2 NGFF cards like AX200 or AX210

Internal WiFi Antenna Pair for Mini-PCIe Cards

This HighZer0 Electronics RFANT09Z+M1 kit provides two internal patch antennas with 40cm low-loss RF1.13 cables and adhesive backing. They connect to mini-PCIe or Half-Mini PCIe wireless cards using IPEX1, MHF1, or first-generation U.FL ports. The omnidirectional design covers 2.4GHz, 5GHz, 5.8GHz, and 6GHz bands for WiFi and Bluetooth use.

Suits Repairs and Compact Builds with Older Cards

Ideal for upgrading weak, damaged, or missing antennas in motherboards, laptops, desktops, routers, embedded systems, and small form factor builds where hidden internal placement is preferred over external posts. Not suitable for M.2 NGFF cards using IPEX4 or MHF4 connectors, including many AX200, AX210, BE200, WiFi 6E, and WiFi 7 laptop adapters.

Verify Connector Type

Check that your wireless card has IPEX1, MHF1, or U.FL antenna ports; compatible models include 7260HMW, 6235ANHMW, 6205ANHMW, 6300AGN, 633ANHMW, 6200AGN, and 6230ANHMW. Ensure the 40cm cable length can route from the card to the desired mounting spot inside your chassis or enclosure. Confirm adhesive surfaces are clean for secure pad attachment.

Highlights

  • Upgrade weak or missing internal WiFi with 2.5dBi gain omnidirectional antenna pair
  • Compatible with IPEX1, MHF1 and U.FL connectors on mini-PCIe cards like 7260HMW
  • Supports 2.4GHz, 5GHz, 5.8GHz and 6GHz WiFi and Bluetooth applications
  • 40cm low-loss RF1.13 cables with adhesive backing for concealed internal routing
  • Not compatible with IPEX4 or MHF4 connectors on M.2 NGFF cards like AX200 or AX210

Specifications

BrandHighZer0 Electronics
ModelRFANT09Z+M1
TypeWireless Card Antenna
ColorMulticoloured
FeaturesLightweight,Flexible,Adhesive Backing

Questions about this item

Which wireless card connector must my motherboard or laptop already have for this antenna pair to plug in?

The cables use IPEX1, MHF1 or first-generation U.FL plugs, so the card must present one of those three connector types.

Will these antennas work with the Intel 7260HMW card I am keeping in my older laptop?

Yes, the 7260HMW is listed among the compatible mini-PCIe HMW cards, so the pair will connect directly.

After installing the pair, what signal behaviour shows the antennas are functioning correctly?

You should see stable reception across 2.4 GHz, 5 GHz, 5.8 GHz and 6 GHz bands with an SWR below 2 and up to 2.5 dBi gain.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.