HighZer0 Electronics
HighZer0 Electronics ANT11Z+BRZ+RPSMA-M 10dBi Tri-Band RP-SMA Network Antenna Pair
A pair of adjustable 10 dBi tri-band antennas covering 2.4, 5 and 6 GHz for Wi-Fi 7, Wi-Fi 6E, WI-FI 6, Wi-Fi 5 and Wi-Fi 4 routers with RP-SMA connectors
- TypeWiFi Router Antenna
- ColorBlack/Bronze
- FeaturesWi-Fi 7,Wi-Fi 6E,WI-FI 6,Wi-Fi 5,Wi-Fi 4,Bluetooth
- 10 dBi high gain extends wireless range and reduces dead zones
- Tri-band 2.4 GHz, 5 GHz, and 6 GHz support covers Wi-Fi 7 and Wi-Fi 6E devices
- RP-SMA male connector fits most routers, mesh systems, and WiFi cards
- Adjustable external design lets you position antennas for optimal signal direction
- Dual antenna pair enables MIMO performance for more stable connections
Tri-band antenna pair for Wi-Fi 7 and 6E
This pair of 10 dBi antennas upgrades routers, mesh nodes, Wi-Fi cards and USB adapters that use RP-SMA male connectors. They cover the 2.4 GHz, 5 GHz and 6 GHz bands used by Wi-Fi 7, Wi-Fi 6E, WI-FI 6, Wi-Fi 5 and Wi-Fi 4 equipment. Two antennas enable MIMO operation for improved throughput and link reliability. Buyers whose hardware uses standard SMA male connectors cannot use this kit.
RP-SMA male fit and adjustable positioning
The RP-SMA male plug has no centre pin, so it mates only with RP-SMA female jacks found on most consumer wireless gear. Each antenna pivots at the base, letting you angle the element for best signal path around walls or furniture. Black and bronze finish matches typical networking hardware. No tools are required for installation.
Passive gain with no power draw
As passive elements the antennas add no heat, noise or electrical load to the system. The 10 dBi maximum gain focuses radiated energy toward the horizon, extending usable range in open areas while reducing dead zones. Performance depends on clear line of sight and correct orientation.
Highlights
- 10 dBi high gain extends wireless range and reduces dead zones
- Tri-band 2.4 GHz, 5 GHz, and 6 GHz support covers Wi-Fi 7 and Wi-Fi 6E devices
- RP-SMA male connector fits most routers, mesh systems, and WiFi cards
- Adjustable external design lets you position antennas for optimal signal direction
- Dual antenna pair enables MIMO performance for more stable connections
Specifications
| Brand | HighZer0 Electronics |
|---|---|
| Model | ANT11Z+BRZ+RPSMA-M |
| Type | WiFi Router Antenna |
| Color | Black/Bronze |
| Features | Wi-Fi 7,Wi-Fi 6E,WI-FI 6,Wi-Fi 5,Wi-Fi 4,Bluetooth |
Questions about this item
What tri-band frequencies does the 10 dBi RP-SMA antenna support?
The antenna covers 2.4 GHz, 5 GHz and 6 GHz bands for Wi-Fi 4, Wi-Fi 5, WI-FI 6, Wi-Fi 6E and Wi-Fi 7 devices.
Which connector does this model use and will it fit my router?
This pair uses RP-SMA Male connectors with no centre pin; verify your device has an RP-SMA Female jack before buying.
How do I install the pair for best MIMO performance?
Screw both antennas onto the RP-SMA ports, then angle each one differently — vertical and horizontal — to exploit spatial diversity.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
