We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

HiFind 1/0 AWG CCA Amplifier Wiring Kit 17 ft

SKU CH-GRQ6-D234C

Complete 17 ft amplifier wiring kit with 0 AWG CCA power and ground cables, dual-shielded OFC RCA, 16 AWG speaker wire, 18 AWG remote wire, 200A ANL fuse holder, corrugated tube, fleece tape.

  • TypeCar Audio Amplifier Cable Kit
  • ColorBrown+Black+Blue
  • Length17
  • Complete amp kit with power, ground, signal and remote wires included
  • 200A ANL fuse holder protects amplifier from overload and short-circuit damage
  • Dual-shielded OFC RCA cable with gold-plated connectors reduces interference for clear sound
  • Ultra-flexible CCA insulation withstands oil and extreme temperatures from -40°C to 105°C
  • 50 FT fleece tape, corrugated tube, heat-shrink and zip ties enable tidy cable management

Complete Amp Wiring Kit

The HiFind 1/0 AWG CCA amplifier wiring kit supplies 17 ft of heavy-duty power and ground cable plus dual-shielded RCA, speaker and remote leads for a full car-audio install. It targets DIY builders who want a single package that covers power delivery and signal paths for subwoofers and speakers.

Upgrades from thinner gauge kits

Thicker 1/0 AWG conductors replace common 4 AWG or 8 AWG kits when amplifier draw approaches the 3000 W rating and voltage drop over 17 ft becomes audible. The jump is worth it when the system demands sustained high current and the included 200 A ANL fuse matches the amp's protection spec.

Practical limits of CCA power cable

Copper-clad aluminium carries less current per gauge than solid copper, so the 1054-strand 0.254 mm construction is rated for the kit's stated wattage but not for continuous loads beyond the 200 A fuse. The transparent blue insulation withstands -40 °C to 105 °C, yet the CCA core remains the bottleneck for extreme competition systems.

Highlights

  • Complete amp kit with power, ground, signal and remote wires included
  • 200A ANL fuse holder protects amplifier from overload and short-circuit damage
  • Dual-shielded OFC RCA cable with gold-plated connectors reduces interference for clear sound
  • Ultra-flexible CCA insulation withstands oil and extreme temperatures from -40°C to 105°C
  • 50 FT fleece tape, corrugated tube, heat-shrink and zip ties enable tidy cable management

Specifications

BrandHiFind
TypeCar Audio Amplifier Cable Kit
ColorBrown+Black+Blue
Length17

Questions about this item

Will the 14 mm outer-diameter power cable fit through my firewall grommet?

The 0 AWG CCA power wire has a 14 mm outside diameter, so choose a grommet or drill a hole at least that wide to pass it cleanly.

What is the common mistake when crimping the supplied SC50-8 and SC50-10 terminals?

Installers often skip the 3:1 heat-shrink step after crimping; slide the tubing on first, crimp the terminal, then shrink it to seal the connection.

How often should I inspect the 200 A ANL fuse holder and the fleece-taped loom for heat damage?

Check the fuse holder and the full wire run every 10 months; look for melted insulation, discoloured fuse element or compressed fleece tape and replace any damaged section.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.