We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 3.5 inch front panel with two USB 3.0 ports

Hetai Tech

Hetai Tech 3.5" USB 3.0 Front Panel Floppy Bay 2-Port Hub 20-Pin

SKU CH-T8ZA-GH320

Adds two USB 3.0 ports to a 3.5 inch front bay with a 20-pin internal connector and 60cm cable

  • TypeUSB
  • Adds two front USB 3.0 ports for fast peripheral access
  • SuperSpeed transfer up to 5 Gb/s with USB 2.0 backward compatibility
  • Driver-free hot-swap operation plugs straight into 20-pin header
  • Fits a standard 3.5-inch floppy bay with included screws
  • 60 cm internal cable reaches most motherboard layouts

Front-Panel USB 3.0 Hub for 3.5-Inch Bays

This front-panel hub adds two USB 3.0 Type-A ports to a desktop by mounting in a standard 3.5-inch floppy drive bay. It is aimed at builders who want convenient front access to super-speed USB without opening the case. The unit draws power from the motherboard header and requires no external supply. It suits any system with an internal USB 3.0 header and a free 3.5-inch bay.

Requires Internal USB 3.0 20-Pin Header

The single specification that decides compatibility is the presence of a 20-pin USB 3.0 header on the motherboard. Without that header the hub cannot deliver 5 Gb/s speeds and will not function. The included cable is approximately 60 cm long, giving enough reach for most mid-tower layouts. Systems lacking the header would need a separate PCI-E add-in card to use the front ports at USB 3.0 speed.

Mounts in a 3.5-Inch Bay with Side Screws

Installation uses the four supplied screws that engage the side mounting holes of the bay. Cases that only provide bottom screw holes cannot secure this panel. The hub frees rear I/O ports by moving two USB 3.0 connections to the front, and it remains backward compatible with USB 2.0 and 1.1 devices. No driver installation is required on supported Windows versions from XP through 10.

Highlights

  • Adds two front USB 3.0 ports for fast peripheral access
  • SuperSpeed transfer up to 5 Gb/s with USB 2.0 backward compatibility
  • Driver-free hot-swap operation plugs straight into 20-pin header
  • Fits a standard 3.5-inch floppy bay with included screws
  • 60 cm internal cable reaches most motherboard layouts

Specifications

TypeUSB

Questions about this item

What does the 5 Gb/s headline speed actually deliver once the panel is installed in my PC?

The two front ports run at up to 5 Gb/s when connected to a motherboard USB 3.0 header or a USB 3.0 PCIe card; they fall back to USB 2.0 or 1.1 speeds with older headers.

Which internal connector does the panel use and what does that limit?

A 20-pin internal USB 3.0 header feeds both Type-A ports; without that header on the motherboard or an add-in card the ports will not operate at 3.0 speed.

Will the panel screw into my case's 3.5" bay?

The unit includes four side-mount screws for a standard 3.5" floppy bay; cases that only provide bottom mounting holes will not accept the screws.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.