We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White PVC Y-strainer with three 3/4-inch NPT ports and a removable 20-mesh screen

HAYWARD POOL PRODUCTS INC

HAYWARD POOL PRODUCTS INC YS10075T Y Strainer 3/4 in 150 psi

SKU CH-ZYW3-MV8E6

A ¾ in PVC Y-strainer with 20-mesh screen, three NPT ports and a 6.8 gpm flow factor rated to 150 psi

  • TypeNew
  • Protects pumps with 20 mesh PVC screen
  • Handles 150 psi maximum working pressure
  • Delivers 6.8 gpm flow with low restriction
  • Threaded 3/4 in NPT ports for easy install
  • Durable PVC housing resists corrosion and chemicals

3/4-inch NPT Y Strainer

The Hayward YS10075T is a PVC Y-type strainer designed for 3/4-inch NPT threaded piping. It filters debris from water lines using a 20-mesh screen while handling a Cv flow factor of 6.8 gpm. The housing includes a 3/4-inch blow-off port for easy cleaning without disassembly.

For residential pool and spa plumbing

This strainer suits installers who need a compact, corrosion-resistant filter on 3/4-inch supply or return lines. It is not intended for systems that require finer filtration than 20 mesh or for piping larger than 3/4 inch. Buyers needing higher pressure ratings at elevated temperatures should verify the 125 psi limit at 100 degrees Fahrenheit.

150 psi rating with 125 psi at 100°F

The body is rated to 150 psi, though the specified maximum working pressure drops to 125 psi at 100 degrees Fahrenheit. The 6.8 gpm Cv factor provides adequate flow for typical 3/4-inch circulation loops. Headroom diminishes if the mesh clogs or if operating temperatures exceed the rated limit.

Highlights

  • Protects pumps with 20 mesh PVC screen
  • Handles 150 psi maximum working pressure
  • Delivers 6.8 gpm flow with low restriction
  • Threaded 3/4 in NPT ports for easy install
  • Durable PVC housing resists corrosion and chemicals

Specifications

BrandHayward
TypeNew

Questions about this item

What NPT-threaded piping do I need to connect the 3/4 in ports?

The strainer has three 3/4 in NPT ports — inlet, outlet and blow-off — so you need matching 3/4 in NPT fittings or pipe nipples for each connection.

Will the 20 mesh PVC screen restrict flow if I keep my existing 3/4 in pump line?

The published Cv is 6.8 gpm, which is the flow capacity through the 20 mesh screen at the rated pressure; compare that figure with your pump curve to confirm compatibility.

How can I verify the strainer is sealing at the rated 150 psi after installation?

Pressurise the system to the working pressure, inspect all three NPT joints and the blow-off port for leaks, and confirm the pressure gauge holds steady at or below 150 psi.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.