We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

HANNORD

HANNORD VGA cable 5 ft 5-pack blue 15-pin 1080P 60Hz

SKU CH-NKC7-479F1

Five 15-pin VGA cables support 1920x1080 at 60 Hz with foil and braid shielding for monitors and projectors

  • ColorBlack & Blue
  • Sharp 1080P display at 60 Hz via 15-pin link
  • Five cables connect multiple screens from one purchase
  • Shielded copper cores block EMI and RFI noise
  • Works with monitors, projectors, KVMs and splitters
  • Card-point plugs seat securely in 15-pin female ports

Five-pack VGA cables for multi-display setups

This HANNORD bundle supplies five 15-pin male-to-male VGA cables in a blue finish. Each cable carries analogue video up to 1920x1080 at 60 Hz and supports common resolutions such as 800x600, 1024x768 and 1600x1200. Foil and braid shielding with pure copper conductors reduces EMI and RFI noise. The pack suits offices, classrooms or labs needing several identical links.

Replaces worn or missing single cables in bulk

Swapping out damaged, lost or too-short VGA leads is the typical reason to buy this pack. The upgrade is worthwhile when you standardise cabling across multiple workstations, projector carts or KVM switches and want consistent shielding and connector quality. It does not serve users who need digital interfaces such as HDMI or DisplayPort, or resolutions beyond 1080P at 60 Hz.

Check for 15-pin female ports and analogue source

Verify that every source and display device offers a 15-pin female VGA connector, also labelled RGB, DB-15, DE-15, HD-15, HDB-15 or D-sub 15. The cables carry analogue signals only, so the graphics output must provide VGA signalling. Note the card-point connector design requires firm insertion. Ensure the 5-foot length reaches between your equipment without strain.

Highlights

  • Sharp 1080P display at 60 Hz via 15-pin link
  • Five cables connect multiple screens from one purchase
  • Shielded copper cores block EMI and RFI noise
  • Works with monitors, projectors, KVMs and splitters
  • Card-point plugs seat securely in 15-pin female ports

Specifications

ColorBlack & Blue

Questions about this item

How much space does the 15-pin male connector need behind the female VGA port?

The male-to-male cable uses a standard 15-pin HD15 plug; allow enough depth behind the female port for the connector body and strain relief so the card-point pins seat fully.

What is the correct way to insert the 15-pin plug so the card-point pins do not bend?

Align the 15 pins with the female port, then apply firm, even pressure until the connector seats completely; the design requires a little force to overcome the card-point alignment.

When should a cable from this 5-pack be replaced?

Replace a cable if the 15-pin plug develops bent pins, the foil-and-braid shielding is exposed, or the pure copper cores show damage that degrades the 1080P 60Hz signal.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.