We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short black adapter cable with USB 3.0 plug and SATA connector for 2.5 inch drives

HANNORD

HANNORD USB 3.0 to SATA III Adapter Cable 2.5" 23cm

SKU CH-MAK4-FM618

Connects a 2.5" SATA HDD or SSD to a USB 3.0 port with UASP support for faster transfers, no extra power needed

  • Changer TypeUSB to SATA
  • SpecificationsUSB 3.0 to SATA Adapter
  • Thunderbolt 3No
  • Connector AUSB 3.0
  • Connector BSATA III
  • FeaturesSATA to USB Converter for 2.5" Hard Drives Disk
  • Connect 2.5" SATA drives via USB 3.0 for cloning and file transfer
  • UASP support enables up to 20% faster speeds on compatible systems
  • No external power needed for 2.5" HDD or SSD operation
  • Hot-swappable and driver-less across Windows, Mac OS X and Linux
  • 23 cm cable with LED power and activity indicator

Portable 2.5" SATA adapter

This USB 3.0 to SATA III adapter cable connects a 2.5" SATA hard drive or SSD to a computer for cloning, file transfer or external storage upgrades. The 23cm cable requires no extra power and works with Windows, Mac OS X and Linux systems. It is not compatible with 3.5" drives.

UASP protocol support

UASP support can deliver a 20% faster transfer rate when the host system, drive and operating system all support the protocol. Windows 8 and later plus Mac OS 8 and later enable UASP; earlier versions fall back to standard USB bulk endpoints. An LED indicates power and activity status.

Check drive size and OS version

Verify the target drive is a 2.5" SATA HDD or SSD; 3.5" models will not work. Confirm the host has a USB 3.0 port for full 5 Gbps bandwidth, though the adapter is backward compatible with USB 2.0 and 1.1 ports. Ensure the operating system is Windows 8 or newer or Mac OS 8 or newer to use UASP acceleration.

Highlights

  • Connect 2.5" SATA drives via USB 3.0 for cloning and file transfer
  • UASP support enables up to 20% faster speeds on compatible systems
  • No external power needed for 2.5" HDD or SSD operation
  • Hot-swappable and driver-less across Windows, Mac OS X and Linux
  • 23 cm cable with LED power and activity indicator

Specifications

Changer TypeUSB to SATA
SpecificationsUSB 3.0 to SATA Adapter
Thunderbolt 3No
Connector AUSB 3.0
Connector BSATA III
FeaturesSATA to USB Converter for 2.5" Hard Drives Disk

Questions about this item

Will the 23 cm cable need replacing if it frays from daily plugging?

The 23 cm cable is a fixed part of the adapter; if the USB 3.0 or SATA III connectors wear out, the whole unit must be replaced.

What throughput ceiling appears first when cloning a 2.5" SSD all day?

The USB 3.0 link caps at 5 Gbps, and UASP only adds 20 % when the drive, OS and host all support it.

Does the adapter get hot or draw extra power during a full-day backup?

No external power is needed for 2.5" drives, and the LED simply shows activity; heat stays low because the adapter draws only bus power.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.