We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black SATA to USB 2.0 cable adapter with 22-pin connector for 2.5 inch drives

HANNORD

HANNORD SATA to USB 2.0 Cable Adapter 2.5" 22 Pin 7+15

SKU CH-1B4M-ED1EX

Connects a 2.5" SATA drive to USB 2.0 at up to 480 Mbps with dual USB power, no external supply needed

  • Thunderbolt 3No
  • Connector A1x USB 2.0 male
  • Connector B1x 2.5in SATA III
  • Connect any 2.5" SATA drive via USB 2.0
  • Up to 480 Mbps transfer rate for quick file access
  • Dual USB connectors draw power from the host port
  • Works with Windows 98 through 10 and Mac OS X
  • Compatible with major 2.5" HDD and SSD brands

Connect 2.5″ SATA drives via USB 2.0

The HANNORD cable adapter lets you attach any 2.5″ SATA hard drive or SSD to a desktop, laptop or PC through a standard USB 2.0 port. It draws power directly from the host port, so no external supply is required. The 22‑pin 7+15 connector fits both HDDs and SSDs up to 7200 rpm. This suits users who need quick, temporary access to bare drives for backup, cloning or data recovery. It is not for 3.5″ drives or for anyone who needs sustained throughput beyond the USB 2.0 ceiling.

Plug‑and‑play with a dual‑USB lead

Installation is driver‑free on Windows 98 through 10, Mac OS X and even PS4 — just connect the SATA end to the drive, plug the main USB connector into the computer and attach the second USB lead for extra current. The only common snag is forgetting the supplementary connector, which can leave a 7200 rpm drive under‑powered and unrecognised. Hot‑swap works once both leads are seated. No software configuration is mentioned in the specifications.

Limited to USB 2.0 bandwidth

The interface tops out at 480 Mbps and is backward compatible with USB 1.1, so real‑world transfer rates will be far below the native SATA III capability of the attached drive. Mechanical 7200 rpm disks and fast SSDs alike will be bottlenecked by the cable, making it unsuitable for running operating systems or editing large media files directly from the drive. For archival copies or occasional file pulls the speed is adequate.

Highlights

  • Connect any 2.5" SATA drive via USB 2.0
  • Up to 480 Mbps transfer rate for quick file access
  • Dual USB connectors draw power from the host port
  • Works with Windows 98 through 10 and Mac OS X
  • Compatible with major 2.5" HDD and SSD brands

Specifications

Thunderbolt 3No
Connector A1x USB 2.0 male
Connector B1x 2.5in SATA III

Questions about this item

How can I confirm the adapter is working after connecting a 2.5" SATA drive?

The drive should appear in your file manager within seconds of plugging the USB 2.0 connector into the computer; no driver installation is required.

What is included and what must I supply myself?

The box contains the 22-pin SATA to USB 2.0 cable with dual USB plugs; you provide the 2.5" SATA hard drive or SSD and a computer with a USB 2.0 port.

Which version of the adapter should I choose for a 2.5" SATA drive?

This single model handles any 2.5" SATA I, II or III hard drive or SSD up to 7200 rpm, drawing power from the host USB port.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.