We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black and white SATA male to Molex female adapter cable 20cm long

HANNORD

HANNORD SATA Male to 4pin Molex Female Power Adapter Cable 20cm

SKU CH-RKGX-V40V3

Converts a 15-pin SATA male connector to a 4-pin Molex female connector for powering 3.5-inch drives with a 20cm 18AWG copper cable

  • TypeSATA Cable
  • ColorBlack & White
  • Length7.87inch
  • Terminal GenderMale to Female

Pack 1 Pack

  • Converts 15-pin SATA power to 4-pin Molex for legacy drives
  • 18 AWG copper conductors deliver reliable power over 20 cm
  • Supports 3.5-inch SATA hard disks and optical drives
  • Male-to-female terminals enable direct connection without extra adapters
  • Black and white colour coding simplifies cable identification

SATA to Molex power adapter

This 20 cm cable converts a 15 pin SATA male connector to a 4 pin Molex female connector so legacy optical drives and 3.5 inch hard disks can draw power from a modern supply. The 18 AWG copper conductors handle the current required by mechanical drives without voltage drop. It is aimed at builders upgrading older storage into newer chassis. ||

Thermals noise and power draw

The passive adapter adds no active components so it generates no heat or noise of its own. Power draw is determined entirely by the attached drive and the host supply. The short 7.87 inch length keeps resistance low and avoids clutter inside tight cases. ||

What the bundled items change

Only the single adapter cable is included; there are no extra brackets, screws or software. Its presence simply lets you reuse existing Molex equipped drives without replacing the power supply or adding a separate Molex cable.

Highlights

  • Converts 15-pin SATA power to 4-pin Molex for legacy drives
  • 18 AWG copper conductors deliver reliable power over 20 cm
  • Supports 3.5-inch SATA hard disks and optical drives
  • Male-to-female terminals enable direct connection without extra adapters
  • Black and white colour coding simplifies cable identification

Specifications

BrandHANNORD
TypeSATA Cable
ColorBlack & White
Length7.87inch
Terminal GenderMale to Female

Other versions of this model

2 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I install the 15-pin SATA male end and avoid bending the 18AWG wires?

Plug the 15-pin SATA male connector firmly into the power supply SATA port, then attach the 4-pin Molex female to the drive; route the 20cm cable so the 18AWG copper conductors are not sharply bent at either connector.

Will the 18AWG copper conductors or the Molex pins need replacement over time?

The 18AWG copper wires and gold-plated contacts are rated for the adapter's service life; no scheduled replacement is required unless physical damage occurs to the 15-pin SATA male or 4-pin Molex female ends.

At what point does the 20cm length limit drive placement in a 3.5-inch bay?

The 20cm cable reaches drives mounted within roughly 7.87inch of the power supply SATA port; longer runs need an additional extension.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.