We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three black-and-white SATA 15-pin male to 4-pin Molex female adapter cables, 20 cm long

HANNORD

HANNORD SATA 15pin Male to 4pin Molex Female Power Adapter Cable 20cm 3 Pack

SKU CH-GM0T-9RBK1

Converts a 15-pin SATA power connector to a 4-pin Molex female for legacy drives

  • TypeSATA Cable
  • ColorBlack & White
  • Length7.87inch
  • Terminal GenderMale to Female

Pack 3 packs

  • Converts 15pin SATA power to 4pin Molex for legacy drives
  • 18AWG copper conductors ensure reliable power delivery
  • 20cm length fits tight chassis routing
  • Supports 3.5in SATA hard disks and optical drives
  • Pack of three adapters for multiple device connections

Power Adaptor for Legacy Drives

This three-pack converts a 15pin SATA male connector into a 4pin Molex female connector so older 3.5 inch hard disks and optical drives can draw power from a modern supply. Each cable uses 18AWG copper conductors and measures 20cm in length.

Replacing Molex Splitters

The adaptors remove the need for Molex Y-splitters when a power supply has spare SATA plugs but insufficient 4pin leads. The jump is worth it when adding a legacy DVD-RW or mechanical drive to a chassis that only exposes SATA power outputs.

Check Connector Orientation

Verify that the target device uses a standard 4pin Molex socket and that the 20cm reach spans the gap between the SATA plug and the drive bay. Ensure the power supply provides a 15pin SATA male lead with enough slack for routing.

Highlights

  • Converts 15pin SATA power to 4pin Molex for legacy drives
  • 18AWG copper conductors ensure reliable power delivery
  • 20cm length fits tight chassis routing
  • Supports 3.5in SATA hard disks and optical drives
  • Pack of three adapters for multiple device connections

Specifications

BrandHANNORD
TypeSATA Cable
ColorBlack & White
Length7.87inch
Terminal GenderMale to Female

Other versions of this model

2 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 15pin SATA male connector on this cable fit my 3.5 inch hard drive power socket?

Yes, the 15pin SATA male end plugs directly into the standard power port on a 3.5 inch SATA hard drive or optical drive.

Do I need any tools to connect the 4pin Molex female end to my power supply's Molex lead?

No tools are required; the 4pin Molex female connector pushes onto the power supply's male Molex plug until it clicks, but take care to align the chamfered corners so the pins do not bend.

The cable uses 18AWG copper wire; will it degrade or need replacement under normal desktop use?

The 18AWG copper conductors are rated for the current drawn by 3.5 inch SATA drives and do not have a scheduled replacement interval; inspect the connectors only if you notice intermittent power.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.