Halo
Halo HLB8169FS1EMWR 1761-Lumen 8-in Desk Lamp
An 8-inch recessed LED downlight delivering 1761 lumens with switchable colour temperature and 90 CRI colour accuracy
- typeSingle Lamp
- High 90 CRI renders colours accurately
- Dimmable down to 5% for flexible ambience
- Wet-location rated for showers and damp ceilings
- Energy STAR certified for efficient operation
- Installs in 3-1/2 in. plenum without recessed cans
Halo 8-in LED Downlight
The Halo HLB8169FS1EMWR is an 8-inch ultra-thin LED lens downlight with a remote driver and junction box. It suits new construction and remodel projects where recessed cans are impractical. Installers can mount it from below the ceiling in as little as 3-1/2 inches of plenum height. The fixture is rated for direct contact with insulation and provides an airtight seal.
Sustained output and colour quality
Field-selectable colour temperature lets the installer match the space without swapping fixtures. A minimum 90 CRI with R9 50 and colour accuracy within 4 SDCM maintains consistent rendering over long operating periods. Phase dimming at 120 volts reaches down to 5 percent without flicker. Energy STAR certification confirms stable efficacy throughout the rated lifetime.
Thermal safety and wet-location durability
IC and non-IC ratings allow the housing to rest against insulation while managing heat within safe limits. The wet-location listing approves use in showers and protected ceilings where moisture is present. Canless construction eliminates the traditional can that can trap heat. A five-year limited warranty backs the thermal and electrical design.
Highlights
- High 90 CRI renders colours accurately
- Dimmable down to 5% for flexible ambience
- Wet-location rated for showers and damp ceilings
- Energy STAR certified for efficient operation
- Installs in 3-1/2 in. plenum without recessed cans
Specifications
| type | Single Lamp |
|---|
Questions about this item
How much heat does the 1761-lumen LED produce when it runs all day?
The ultra-thin lens downlight installs in as little as 3-1/2 in. plenum height and is rated for direct contact with insulation, so heat output stays low enough for IC-rated housings during continuous operation.
What electrical supply must already be in place for this 120-volt dimmable downlight to work?
A 120-volt circuit with a compatible phase-cut dimmer is required; the remote driver/junction box connects directly to that supply and handles the dimming down to 5 %.
Will the 90 CRI light match the colour quality of older halogen fixtures I keep in the same room?
With a minimum 90 CRI, R9 of 50 and colour accuracy within 4 SDCM, the selectable-colour LED renders tones closely enough to blend with existing halogen sources.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



