Halo
Halo HLB6099FS1EMWR-6PK desk lamp 900 lumen 6 pack
Six-pack of 6-inch canless LED downlights with selectable colour temperature from 2700 K to 5000 K, 90 CRI, dimmable to 5 %, wet-rated and air-tight for shallow ceilings
- typeSingle Lamp
- Canless design installs without housing or junction box
- Selectable CCT offers five settings from 2700K to 5000K
- Wet-rated and Air-tite for damp or dry locations
- 90 CRI and 1061 lumens at 3000K deliver accurate colour
- 50000-hour LED life equals 22 years at six hours daily
Canless recessed downlights for new
The Halo HLB6099FS1EMWR-6PK is a six-pack of 6-inch ultra-thin LED downlights that install without a housing or junction box. The canless design fits into shallow ceilings with as little as 3.5 in plenum clearance, making it suitable for new construction, remodel and retrofit projects where traditional cans cannot go.
Wet-rated fixture with selectable colour
Each unit is Air-tite and wet-rated for use in damp or dry locations. A switch on the fixture selects one of five colour temperatures from 2700K to 5000K before installation. The integrated driver dims continuously down to 5% on a standard 120-Volt electronic low-voltage dimmer, and the LEDs are rated for 50000 hours of life.
Title 24 compliant with high colour rendering
The downlights deliver 90 CRI and meet Title 24 requirements. At 3000K they produce 1061 lumens, while the pack is labelled at 900 lumens per fixture. No separate bulbs are needed, and the lens provides uniform illumination across the beam.
Highlights
- Canless design installs without housing or junction box
- Selectable CCT offers five settings from 2700K to 5000K
- Wet-rated and Air-tite for damp or dry locations
- 90 CRI and 1061 lumens at 3000K deliver accurate colour
- 50000-hour LED life equals 22 years at six hours daily
Specifications
| type | Single Lamp |
|---|
Questions about this item
How do I install the HLB6099FS1EMWR downlights without a housing or junction box, and what clearance mistake should I avoid?
Mount the canless fixture directly into the ceiling cut-out; the 1/2 in depth needs at least 3.5 in of plenum space above, so verify that clearance before cutting.
Will the integrated LEDs in this 6-pack ever need replacing, and what does the 50,000-hour rating mean in years?
The LEDs are non-replaceable; at 6 hrs daily they last about 22 yrs, at 3 hrs daily about 44 yrs, so replacement is unlikely during normal ownership.
What limits continuous output first — heat, dimmer compatibility, or the 120-Volt driver — during extended use?
The on-board 120 V driver and thermal design set the sustained-output ceiling; use a standard electronic low-voltage dimmer for stable dimming down to 5 %.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



