We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black 30 cm ARGB splitter cables, each with one male and three female 3-pin connectors

Gtziqa 1-to-3 ARGB Splitter Cable 2-Pack 30 cm 5V 3-Pin

SKU CH-98WA-YM03P

Two 30 cm 1-to-3 ARGB splitter cables with 5 V 3-pin connectors for addressable RGB strips or fans

  • TypeBlack
  • ColorBlack
  • Connector Detail3 Pin to Female-to-Female
  • Terminal GenderFemale to Female
  • SpecificationsBlack
  • ShieldingBlack
  • Connect up to three ARGB devices per header with 1-to-3 splitter design
  • Extend addressable RGB lighting 30 cm for flexible component placement
  • Tool-free installation via male connector — just align arrow and plug in
  • Two cables and eight male connectors included for multi-zone lighting builds
  • Compatible with 5050 and 3528 addressable RGB strips and 5 V fans

Two-Pack ARGB Splitter Cable

This pack contains two 30 cm 1-to-3 addressable RGB splitter cables. Each cable splits a single motherboard 5 V 3-pin ARGB header into three female connectors. The set also includes eight 3-pin male connectors for custom wiring. It is designed for builders adding multiple ARGB devices to one header.

Suits Single-Header ARGB Builds

These cables suit systems that have only one 5 V ARGB header but need to run several LED strips or 5 V ARGB fans. They do not work with 4-pin 12 V RGB headers, so buyers using standard 12 V RGB gear should look elsewhere. The fixed 30 cm length may also limit routing in larger chassis.

Plug-and-Play With Arrow Alignment

Installation requires no soldering or tools; align the arrow on each connector with the header pinout and press home. The most common issue is reversed insertion, which leaves LEDs dark or showing wrong colours. Verify the arrow direction on every connector before powering on.

Highlights

  • Connect up to three ARGB devices per header with 1-to-3 splitter design
  • Extend addressable RGB lighting 30 cm for flexible component placement
  • Tool-free installation via male connector — just align arrow and plug in
  • Two cables and eight male connectors included for multi-zone lighting builds
  • Compatible with 5050 and 3528 addressable RGB strips and 5 V fans

Specifications

BrandGtziqa
TypeBlack
ColorBlack
Connector Detail3 Pin to Female-to-Female
Terminal GenderFemale to Female
SpecificationsBlack
ShieldingBlack
ConstructionAddressable RGB
FeaturesBlack
Disclaimernot_applicable

Questions about this item

What motherboard header do I need to plug the Gtziqa 1-to-3 ARGB splitter into?

You need a 5V 3-pin addressable RGB header on the motherboard; the splitter does not work with 4-pin 12V RGB headers.

Can I connect 12V 4-pin RGB fans or strips to these cables alongside the 5V ARGB devices?

No, the cables only support 3-pin 5V addressable RGB devices such as 5050 or 3528 LED strips and 5V ARGB fans.

How do I confirm the arrow-marked connectors are oriented correctly after installation?

Align each arrow on the male and female plugs with the corresponding pin-1 marker on the motherboard header and device sockets; the LEDs will light and respond to software control when orientation is correct.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.