Gritin Under Cabinet LED Lighting Kit 6 PCS 9.8 ft 1500lm 2700K RF Remote 24W Adapter
Six pre-cut LED strips totalling 9.8 ft deliver 1500 lm of 2700 K warm-white light with RF remote dimming and timing up to 60 ft
- finishPolished
- styleModern
- Dimmable warm glow for every task
- 1500 lm total output with RF remote dimming
- 17-key RF remote controls lights up to 60 ft away
- Tool-free mounting with strong adhesive tape and screw-free design
- Low-voltage 12 V system stays cool and connects up to 14 strips
DIY LED Light Strip Kit
The Gritin Under Cabinet LED Lighting Kit includes six pre-cut strips totalling 9.8 ft of warm white illumination. It suits homeowners who want adjustable accent lighting for cabinets, closets, desks, bookshelves or display cases without hiring an electrician. Buyers who need colour-changing effects or smart-home integration will not find those functions here.
Low-Voltage Thermals and RF Control
The strips operate at DC12 V and draw up to 24 W from the included adapter, producing minimal heat during normal use. A 17-key RF remote provides dimming, timing off and dynamic modes from up to 60 feet away without line of sight. The LEDs have a CRI greater than 82 for accurate colour rendering at 2700K.
Sustained Load Behaviour and Expansion
The 24 W adapter can support up to 14 strips (22.96 ft) for larger installations, and each strip can be trimmed along marked lines every three LEDs. Adhesive backing and screw-free connectors allow a tool-free setup that remains secure over extended runs. The system maintains consistent brightness across the full length when powered within the rated capacity.
Highlights
- Dimmable warm glow for every task
- 1500 lm total output with RF remote dimming
- 17-key RF remote controls lights up to 60 ft away
- Tool-free mounting with strong adhesive tape and screw-free design
- Low-voltage 12 V system stays cool and connects up to 14 strips
Specifications
| Brand | Gritin |
|---|---|
| finish | Polished |
| style | Modern |
Questions about this item
How do I install the 6 pre-cut strips and where do people go wrong?
Clean the surface, peel the strong adhesive backing, stick each strip in place, then connect them using the included flexible connectors; the step most often missed is testing the RF remote pairing before the adhesive sets.
What maintenance or replacement will the kit need later?
The 24 W adapter is rated for up to 14 strips (22.96 ft), so you can add up to 8 extra strips later; individual strips can be trimmed at the marked lines every 3 LEDs and reconnected with a 3-pin connector.
What limit appears first during sustained use?
The 24 W power supply caps the system at 14 strips total, so exceeding that length will cause voltage drop and dimming before any thermal issue arises.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



