We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red molded case holding 43-piece 3/8" drive socket set with standard and deep SAE metric sockets, extension, universal joint, adapter

Grey Pneumatic

Grey Pneumatic 1643RD 3/8" Dr 43 Pc SAE/Metric 12 Pt Engine Tool Set

SKU CH-ATY4-CGW1G

43-piece 3/8" drive socket set covers SAE and metric sizes in standard and deep lengths with extension, universal joint and adapter in a moulded case

  • 43-piece set covers SAE and metric engine fasteners
  • 12-point sockets grip bolt heads from multiple angles
  • Standard and deep lengths reach recessed and exposed bolts
  • Includes extension, universal joint and hex adapter for tight access
  • Moulded case keeps 9.64 lb kit organised and portable

43-Piece 12-Point Engine Socket Set

This 43-piece engine tool set provides 3/8-inch drive sockets in both SAE and metric sizes. It covers fractional sizes from 5/16-inch to 3/4-inch and metric sizes from 8mm to 19mm. Each size is supplied in standard and deep lengths with a 12-point profile. A 3-inch extension, universal joint and 1/4-inch hex adapter complete the kit inside a moulded storage case.

Replaces Mixed Socket Collections

The set consolidates separate standard and deep socket rails into a single organised tray. Technicians who currently reach for multiple cases to find the right length and measurement system gain one complete range. The jump is worth it when engine work demands both SAE and metric fasteners in confined and deep-reach locations.

Verify 3/8-Inch Drive Compatibility

Confirm that your ratchets, torque wrenches and impact tools accept a 3/8-inch square drive before ordering. The included universal joint and extension share the same drive size. The 1/4-inch hex adapter allows bit driver use but does not change the primary drive requirement. The case adds 9.64 lbs to your tool storage load.

Highlights

  • 43-piece set covers SAE and metric engine fasteners
  • 12-point sockets grip bolt heads from multiple angles
  • Standard and deep lengths reach recessed and exposed bolts
  • Includes extension, universal joint and hex adapter for tight access
  • Moulded case keeps 9.64 lb kit organised and portable

Specifications

No published specifications for this item yet.

Questions about this item

Will the 3/8" drive sockets and the 3" extension fit in a standard 3/8" ratchet?

Yes, every socket in the 43-piece set uses a 3/8" square drive, and the included 3" extension is also 3/8", so they connect directly to any standard 3/8" ratchet or breaker bar.

What is the correct way to attach the 3/8" universal joint so it does not bind under load?

Seat the universal joint squarely onto the ratchet anvil first, then push the socket onto the joint until the detent ball clicks; forcing the socket on before the joint is fully seated is the step that causes binding.

If a single 12-point socket from the 19 mm deep metric range is lost, can I buy just that piece under the lifetime warranty?

The lifetime warranty covers individual parts only, so you would contact Grey Pneumatic for a replacement of that specific socket rather than exchanging the whole 43-piece set.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.