We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red metal fuel pump on black wheels with hose and nozzle attached

Great Plains Industries

Great Plains Industries GPI110000-99 M-150S-MU accessories - wheel

SKU CH-G9MV-XQ629

A 12 V manual-closing fuel transfer pump delivering 15 gpm through a 12 ft hose with nozzle included

  • Height9.000
  • Width15.800
  • Length18.300
  • Weight23.1
  • 15 GPM fuel transfer for fast refuelling
  • 12 V DC power runs from vehicle battery
  • 18 ft power cord reaches distant tanks
  • 12 ft hose with nozzle included
  • Manual closing nozzle prevents accidental spills

Manual 12V Fuel Transfer Pump

This 12V DC pump delivers 15 gallons per minute for on-site fuel transfer. It includes an 18-foot power cord, a 12-foot hose with a 3/4-inch diameter and a manual nozzle. The unit weighs 23.1 pounds and measures 18.3 by 15.8 by 9.0 inches.

12V DC Power and Flow Constraints

Operation requires a 12V DC source capable of supporting the motor load. The 15 GPM rate is the practical maximum through the included hose and nozzle assembly. The 18-foot cord limits placement relative to the power connection without an approved extension.

Upgrade from Hand Pumps or Lower-Flow Units

This pump replaces manual rotary or lever hand pumps where speed and reduced operator fatigue are priorities. The jump is worth it when transferring 15 gallons per minute justifies the 12V power requirement and the 23.1-pound weight over simpler gravity or hand-operated methods.

Highlights

  • 15 GPM fuel transfer for fast refuelling
  • 12 V DC power runs from vehicle battery
  • 18 ft power cord reaches distant tanks
  • 12 ft hose with nozzle included
  • Manual closing nozzle prevents accidental spills

Specifications

BrandGreat Plains Industries
Height9.000
Width15.800
Length18.300
Weight23.1

Questions about this item

Should I choose the M-150S-MU or a different GPI pump model?

The M-150S-MU delivers 15 gallons per minute with a 12-volt motor and includes a 12-foot hose and nozzle. Other GPI models vary in flow rate, voltage or included accessories, so match the pump to your required GPM and power source.

What does the 15 GPM rating mean when I am refuelling equipment?

At 15 gallons per minute the pump can fill a 30-gallon tank in roughly two minutes, assuming the 3/4-inch hose and nozzle are unrestricted and the 12-volt supply maintains full voltage.

How does the 12-volt DC interface limit where I can use the pump?

The pump draws power from a 12-volt DC source such as a vehicle battery or dedicated 12-volt supply, so it is limited to sites where that voltage is available and the 18-foot power cord can reach.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.