GRAYBAR
GRAYBAR Cat.6 UTP Patch Cable 25 ft Blue
Category 6 UTP patch cable with RJ-45 connectors on both ends, 25 ft length, blue jacket, ISO 11801 and ANSI/TIA-568-C.2 compliant
- Cat6
- Length25 ft.
- Cat.6 rating supports gigabit Ethernet speeds
- 25 ft length reaches distant network points
- Blue jacket with clear boots aids cable identification
- Copper conductors meet ISO 11801 and ANSI/TIA-568-C.2 standards
- TX6 PLUS modular plugs ensure secure RJ-45 connections
25 ft Cat 6 Blue Patch Cable
This GRAYBAR cable is a Category 6 UTP patch lead terminated with RJ-45 plugs on both ends. The 25 ft length suits typical desk-to-switch or patch-panel runs in offices and homes. Copper conductors and TX6 PLUS modular plugs support the ISO 11801 and ANSI/TIA/EIA-568-C.2 performance grades listed in the specifications. The blue jacket and clear boots make the link easy to identify in crowded racks.
Installers and home users needing a ready-made Cat
Buyers who need a different length, a crossover pin-out, shielded construction or a plenum-rated jacket will not find those variants in this listing. The cable is supplied as a single straight-through patch cord, so projects requiring bulk reel cable or pre-terminated trunk assemblies should look elsewhere.
Cat 6 UTP rating with RJ-45 ends
The Category 6 unshielded twisted-pair rating is the single specification that determines whether this cord meets the bandwidth and crosstalk requirements of the target network. If the installation calls for Cat 6a, Cat 7 or shielded cable, this part will not satisfy that requirement.
Highlights
- Cat.6 rating supports gigabit Ethernet speeds
- 25 ft length reaches distant network points
- Blue jacket with clear boots aids cable identification
- Copper conductors meet ISO 11801 and ANSI/TIA-568-C.2 standards
- TX6 PLUS modular plugs ensure secure RJ-45 connections
Specifications
| Brand | Panduit |
|---|---|
| Cat | 6 |
| Length | 25 ft. |
Questions about this item
Will this Cat 6 patch cable work with my existing Cat 5e router and switch?
Yes, the Category 6 specification is backward compatible with Cat 5e equipment, so the 25 ft cable will link at the highest speed both ends support.
How can I verify the cable is performing to the Cat 6 standard after I plug it in?
Check the link lights on both ports for a gigabit connection and run a speed test; the cable meets ISO 11801 and ANSI/TIA-568-C.2, so it should sustain gigabit throughput across the full 25 ft length.
Does the box include only the blue 25 ft cable with RJ-45 plugs, or do I need to buy boots or connectors separately?
The cable arrives terminated with RJ-45 male plugs on both ends and clear boots already fitted; no additional connectors or boots are required.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



